Home Network Community > All Threads > M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
< All Threads

M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
1234

M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 03:53:51 - last edited 2019-06-03 05:21:02
Model: Deco M5  
Hardware Version: V2
Firmware Version: 1.3.0 Build 20190529 36613

To those that updated via the DECO App to 1.3.0 before it was taken out, 

 

there is a NEWER 1.3.0 which is Build 20190529 36613 which i received via email from TP Link Support (credit to TP link, they ARE listening to our complaints) 

http://support.tp-link.com/f/bffa2478b4/?dl=1

 

the 70702 still had lots of problems, though it didnt drop connects as often as 1.2.8

1) Bad Throughput - can only get 20mb next to a deco? WIRED/Wireless backhaul

2) Authentication failures

3) Poor handoffs

 

 

Is anyone else on 36613 ? 

at least my deco test speed hit back 900+mb (70702 only had me 700 down, 100 up) 

inital testing - the handoffs are faster and throughput at slave nodes are back to normal (getting 400+ on iphone XR and Note 9) 

yet to see about the authentication failures 

 

 

EDIT : 3 DAYS OF USING THIS FIRMWARE AND ITS THE CLOSEST TO PERFECTION. THANK YOU TPLINK

 

  0      
 
  0      
 
#1
Options
32 Reply
Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 14:09:37

How did you upgrade your Deco to this version? WEB GUI?

  0  
  0  
#2
Options
Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 14:16:54 - last edited 2019-05-31 14:27:05

That zip file contains the upgrade program

 

basically just run the program, enter in your tplink login and the ip addresses of your slave deco first and upgrade. Main unit is the last.

 

get the ip via arp -i  and reference ur mac address.

 

best to check in with the support email to ensure its fit for your version.

 

so far this latest firmware has been great - no webGUI though

  1  
  1  
#3
Options
Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 14:24:40
Oh ok! Could you help me with the process? It's asking for username, password, server and firmware. What should I put in the server and firmware fields? User and password are the Wi-Fi user and password? Sorry, I'm new and I'm experiencing difficulties with 70702 version.
  0  
  0  
#4
Options
Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 18:21:29

DY-deco wrote

That zip file contains the upgrade program

 

basically just run the program, enter in your tplink login and the ip addresses of your slave deco first and upgrade. Main unit is the last.

 

get the ip via arp -i  and reference ur mac address.

 

best to check in with the support email to ensure its fit for your version.

 

so far this latest firmware has been great - no webGUI though



@DY-deco no webGUI on main Deco IP in this release? 

  0  
  0  
#5
Options
Re:Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 18:24:34
The webgui seems disabled. Brings me to an invalid page
  1  
  1  
#6
Options
Re:Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 18:25:50

Hope this helps

File:
instruction_190529.docxDownload
  0  
  0  
#7
Options
Re:Re:Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 18:29:29

Thanks, 

 

Build 70702 have enable yet.... 
I will wait next one

  0  
  0  
#8
Options
Re:Re:Re:Re:Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-05-31 22:31:22

Thx for uploading the beta! For me 1.3.0 was disconnecting nodes all the time, now installed this build. (to find out ip address of your nodes you can also check the app, much easier). So far so good, will report back how stable it is, speed is OK! 

  0  
  0  
#9
Options
Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-06-03 06:45:31

Just wonder how to return to stock firmware after flashing this beta version, would like to give it a try, any feedback from anyone who's using this beta?

  0  
  0  
#10
Options
Re:Re:M5 1.3.0 Beta Build 20190529 36613 NOT 70702!!
2019-06-03 07:49:17
I believe you can download the official stock firmware off the Support page, flashed via the same program on the document I'm still on this Beta and can not find any reason to use any of the previous firmwares. everything works well so far.
  0  
  0  
#11
Options
1234

Information

Helpful: 0

Views: 8653

Replies: 32

Related Articles
M5 issues after upgrade 1.3.0
3321 0
Deco m5 has the 1.3.0 firmware?
3605 0
Deco M5 1.5.7 Build 20210819 Rel. 43499
3114 2
"Weak Wifi Security" on iOS 14 (beta) for Deco M5
14396 4
M5 Mac Whitelisting Beta Firmware
450 3
Deco M5 V1 beta firmware 1.5.0 downgrade to 1.4.x
5898 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.