TL-WA701ND Repeater Problem
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WA701ND Repeater Problem
Region : Singapore
Model : TL-WA901ND
Hardware Version : V2
Firmware Version :
ISP : Starhub
Good evening
I have a Wifi ADSL Router (Cisco DPC3925) and a AP set to Repeater Mode (TPLink TL-WA701ND). There are 3 Desktop PCs, 3 laptops and few Iphones and Ipads connecting to the router on a daily basis.
The Router IP is 192.168.0.1 and the Repeater IP is 192.168.0.254. The Router has DHCP enabled ( 192.168.0.10 - 192.168.0.128). The Repeater has DHCP disabled by default.
After setting up using the Quick Setup mode and following the User Guide, the Repeater seems to be working fine for about an hour. After that it stops working and nothing can is able to conenct through the repeater until it is restarted manually.
I am under the impression that once the lease (IP) is renewed on the router for Repeater, it jams.
Any idea on how to solve this issue?
Thank you
Imi
PS: spent the past 48 hours trying to get this to work..
Model : TL-WA901ND
Hardware Version : V2
Firmware Version :
ISP : Starhub
Good evening
I have a Wifi ADSL Router (Cisco DPC3925) and a AP set to Repeater Mode (TPLink TL-WA701ND). There are 3 Desktop PCs, 3 laptops and few Iphones and Ipads connecting to the router on a daily basis.
The Router IP is 192.168.0.1 and the Repeater IP is 192.168.0.254. The Router has DHCP enabled ( 192.168.0.10 - 192.168.0.128). The Repeater has DHCP disabled by default.
After setting up using the Quick Setup mode and following the User Guide, the Repeater seems to be working fine for about an hour. After that it stops working and nothing can is able to conenct through the repeater until it is restarted manually.
I am under the impression that once the lease (IP) is renewed on the router for Repeater, it jams.
Any idea on how to solve this issue?
Thank you
Imi
PS: spent the past 48 hours trying to get this to work..