Bufferbloat with VR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Bufferbloat with VR600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Bufferbloat with VR600
Bufferbloat with VR600
2020-01-15 16:53:29 - last edited 2020-03-04 06:54:08
Model: Archer VR600  
Hardware Version: V2
Firmware Version: 0.2.0 0.9.1 v0074.0 Build 170504 Rel.68210n

Hey,  I have VR600 and found out that I got a lot of bufferbloat, which causes me to bad internet while playing video games, I did try to use QoS but it didn't solve the problem.

There's any solution for the bufferbloat with the VR600? btw there is none on the modem except me, it happened to me also with the TD-W9970.

Thanks for the helpers :)

  0      
  0      
#1
Options
9 Reply
Re:Bufferbloat with VR600
2020-03-03 02:07:31 - last edited 2020-03-06 00:28:10

RoyHarush wrote

Hey,  I have VR600 and found out that I got a lot of bufferbloat, which causes me to bad internet while playing video games, I did try to use QoS but it didn't solve the problem.

There's any solution for the bufferbloat with the VR600? btw there is none on the modem except me, it happened to me also with the TD-W9970.

Thanks for the helpers :)

Hi, what is the bandwidth provided by the ISP? If the bandwidth is very low, it will affect you to play the games.

Do you have any problems when surfing the Internet? How about the router's speed?

  0  
  0  
#3
Options
Re:Bufferbloat with VR600
2020-03-03 20:59:23 - last edited 2020-03-04 06:54:08

@Stella.Q 

 

Hey, the bandwidth is 100mb/s for download and 3mb/s for upload, the bufferbloat happens only in the upload, while it jumps once 3 secs +- to 300ms from 5-10ms.

  0  
  0  
#4
Options
Re:Bufferbloat with VR600
2020-03-04 03:35:43 - last edited 2020-03-06 00:28:24

@RoyHarush 

Hi, would you please send us the screenshot to show the bufferbloat in upload? 

 

Besides, please log in to the router's management page, send us the Advanced--Status page( the whole page).

 

When and where did you buy this router? Does it work fine before?

Does the issue happen when you play all the games or just some specific games?  Do you connect to the router with an Ethernet cable? Is the internet good when you are not playing games?

  0  
  0  
#5
Options
Re:Bufferbloat with VR600
2020-03-12 12:46:41

@Stella.Q 

 

 

Hey, the bufferbloat is in DSLReports web, this is my status page, this issue happens always, I have ping spikes because of it all the time, the pc is connected with an Ethernet cable.

  0  
  0  
#6
Options
Re:Bufferbloat with VR600
2020-03-13 07:46:51

@RoyHarush 

Hi, thanks for the info.
Our engineer will email you later, if you are willing to do further analysis, please check your inbox.
Thanks for your understanding and cooperation in advance, and have a nice day.

  0  
  0  
#8
Options
Re:Bufferbloat with VR600
2020-10-07 17:05:54

@RoyHarush 

Hey Roy,

i have the same problem.

i'm using netvision as isp, i see you use bezeq international so it's not an isp issue.

did you get this problem resolved?

  0  
  0  
#9
Options
Re:Bufferbloat with VR600
2020-10-09 11:06:35

@Stella.Q I have the same issue and Qos only works when you limit your speed to less than 50% why is that?

  0  
  0  
#10
Options
Re:Bufferbloat with VR600
2020-10-12 07:27:37

@Omarrr 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

May I know the hardware and firmware version of your Archer VR600?

What did you mean that Qos only works when you limit your speed to less than 50%, could you please give me a detailed example in case any misunderstanding?

As for the buffer bloat issue, Did it also only happen to upload when playing games or not?

Thanks a lot.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#11
Options
Re:Bufferbloat with VR600
2022-01-22 09:59:41 - last edited 2022-01-22 10:01:22

https://www.waveform.com/tools/bufferbloat?test-id=112e68e8-bf76-4ca3-aff7-8f5253cacff9#question-2

 

Any ideas how i can fix this on my ARcher VR600? I get buffer bloat on wathcinhg movies, skype and gaming

 

hardware : Archer VR600 v3 00000000

Firmware Version : 1.4.0 0.9.1 v009e.0 Build 210826 Rel.42166n

  0  
  0  
#12
Options

Information

Helpful: 0

Views: 2680

Replies: 9

Related Articles