Time Machine setup
Hello,
I'm not able to setup Time Machine to use my share drive on a AX6000... TP-Share is working, i can see and explore the entire disk... with or with out access secure (using U/P). When I try to connect the disk on Time Mchine, ask to login at Archer 6000! Using admin/admin seems to work (connexion a Archer 6000) but after a while, end up with error message "Time Machine unable to connect to backup disk (L’opération n’a pas pu aboutir. (OSStatus erreur 2.)"
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I finaly give up. Even if setting the RW permission allowed me to see rhe disk as a time machine disk, it worked for a day and then the disk was locked. I have reformatted the disk a couple of time, plug it in the Archer, and same behavior. The disk is locked after a few hours ( I gave 6 laptops backup on this time machine). I finally bought a NAS system from Seagate, with time machine support, plug its ethernet port on the Archer, and now I have a working solution since a couple of days. I have no idea why suddenly the disk turns into a read only mode when connected to the Archer. Anyway, not a problem anymore, but the time machine does not seems reliable from TP-Link.
- Copy Link
- Report Inappropriate Content
@dernotte I also finally gave up. Would work for a few days then stop. Would plug the disk in and first aid would state it needed a reformat.
- Copy Link
- Report Inappropriate Content
I also gave up... wasted a ton of time with customer service and had no luck.
- Copy Link
- Report Inappropriate Content
@S-Cote My New NAS system from Segate works like a charm, hourly backup since May, zero issue.
- Copy Link
- Report Inappropriate Content
@matt_film I try that, no change still not working... it's so frustrated!
- Copy Link
- Report Inappropriate Content
@dernotte cool... I'm wondering what is the formating option you choose?
- Copy Link
- Report Inappropriate Content
@S-Cote Hi, same here i bought an ARCHER AX50 Ax3000 router, and im having this same issues hardware-software really unrealible, very dissapointed.
- 1st test, connect a USB 2.0 disc , formatted ad HFS+, shared ok, started doing backup, connection interrumps and TM "share" disappears to the computers,. Backup incomplete. The Disc therefore became read only if connected to the MAC directly.
- 2nd test, connect usb 3.0 disc HFS+, it has some info, and a lot of free space, Shared ok, started doing backup, connection interrumps and TM "share" disappears to the computers,. Backup incomplete. The Disc therefore became read only if connected to the MAC directly. At the point that if the disc is plugged on a mac you cannot execute "First aid". Same as you. HAD TO COPY MY INFO MANUALLY AND REFORMAT THE DISC.
- 3er test. connect same usb 3.0 disc HFS+ partition for backups, and other exfat for the info.
- -copy 150 GB of info to the EXFAT partition shared via SMB protocol , the transfers INTERUMPS suddenly about 2 hs. The share dissapears.
- -doing fIrst backup to the HFS+ partition, about 1 hr. (10 gb transfered), the transfers INTERUMPS. From this point Time machine cannot find the disc anymore.
- this two tests were not made simultaneously
- the disc its working OK. The disc does not power off, or puts to sleep when the router fails sharing it.
Very dissapointed, will probably not buy or recommend TP-link :(
- Copy Link
- Report Inappropriate Content
@S-Cote formating option on the Archer or Seagate ?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Yes, I also can't setup Time Machine, hope anybody knows the solution, otherwise that is very pity.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 7505
Replies: 24
Voters 0
No one has voted for it yet.