RE305 "access point mode" the same as "ethernet backhaul"?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

RE305 "access point mode" the same as "ethernet backhaul"?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
RE305 "access point mode" the same as "ethernet backhaul"?
RE305 "access point mode" the same as "ethernet backhaul"?
2020-05-30 11:18:20 - last edited 2023-12-14 01:28:38
Model: RE305  
Hardware Version: V3
Firmware Version:
Hi,
 
I'm looking for the simplest and cheapest wired mesh network (one router with one satellite).

 

My vision is a C7 router with a wired connection to an RE305 in access point mode. According to the RE305 product page, I could plug "the Ethernet cable into its Ethernet port to easily turn your wired internet connection into a dual band wireless access point."

 

Isn't that essentially an ethernet backhaul? Since I would be freeing up the second wireless band that would normally be used for wireless backhaul (true wireless extension). tp-link seems pretty adament in suggesting that no Onemesh products support ethernet backhaul (see Q5: https://www.tp-link.com/us/support/faq/2690/ ). I also chatted with support and they kind of gave me a non-answer about access points and wouldn't address if they were the same thing or had essentially the same function. Or am I misunderstanding the concept of ethernet backhaul?

 

Thanks in advance
ttyng
  0      
  0      
#1
Options
1 Accepted Solution
Re:RE305 "access point mode" the same as "ethernet backhaul"?-Solution
2020-06-02 08:27:50 - last edited 2023-12-14 01:28:38

@ttyng 

 

Nope, RE305 "access point mode" is not the same as "ethernet backhaul" and RE305 doesn't support the ethernet backhaul, which is stressed in the FAQ you pointed to.

 

Update:

Update:

Hi, It is planned to support EasyMesh over Ethernet Backhaul under Range Extender mode.

It will start with RE315_V1 and gradually be added to other EasyMesh-supported extenders.

RE315 Supports EasyMesh Over Ethernet Backhaul

Note:

1. An extender needs to support EasyMesh (over Wi-Fi) first, then supports EasyMesh over Ethernet Backhaul.

2. Ethernet Backhaul only works when both your main router and satellite extender support EasyMesh over Ethernet Backhaul.

Best regards.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:RE305 "access point mode" the same as "ethernet backhaul"?-Solution
2020-06-02 08:27:50 - last edited 2023-12-14 01:28:38

@ttyng 

 

Nope, RE305 "access point mode" is not the same as "ethernet backhaul" and RE305 doesn't support the ethernet backhaul, which is stressed in the FAQ you pointed to.

 

Update:

Update:

Hi, It is planned to support EasyMesh over Ethernet Backhaul under Range Extender mode.

It will start with RE315_V1 and gradually be added to other EasyMesh-supported extenders.

RE315 Supports EasyMesh Over Ethernet Backhaul

Note:

1. An extender needs to support EasyMesh (over Wi-Fi) first, then supports EasyMesh over Ethernet Backhaul.

2. Ethernet Backhaul only works when both your main router and satellite extender support EasyMesh over Ethernet Backhaul.

Best regards.

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1530

Replies: 1

Related Articles