td-w8968(EU) v4 PPOE connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

td-w8968(EU) v4 PPOE connection problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
td-w8968(EU) v4 PPOE connection problem
td-w8968(EU) v4 PPOE connection problem
2020-07-09 09:09:52
Model: TD-W8961N  
Hardware Version: V4
Firmware Version: 1.1.1 Build 151229 Rel.30697

 

 

hi im from india ..i have a tplink td-w8968 v4 which i was using with an adsl connection from bsnl...now i have switched to railwire FTTH connection and configured the device to work as a wifi router.....the connection from the ONT is given to the LAN4/WAN port of the device...the configuration works and im able to use internet once i hit confirm at the end....but the pronlem is this works only for the first time....if the connection drops or the power fails and modem restarts, it is not automatically reconnecting ....i have to again go through the quicksetup click next next and confirm to reconnect the internet....the username password everything is already there as i typed before...but its just not reconnecting automatically once connection fails......i have attached a screen shot of the configuration page above......when i googled about the issue i have seen some modems having this "always on" or "automatic redial" feature in the configuration page....but i cant find that anywhere in this modem....is there any solution to keep the connection always on

 

this is the model

https://www.tp-link.com/in/support/download/td-w8968/v4/#Firmware

 

this is the user guide

https://images-eu.ssl-images-amazon.com/images/I/B1-h%2Bg62SGS.pdf

 

but i cant find anything that could help me

  0      
  0      
#1
Options
1 Reply
Re: td-w8968(EU) v4 PPOE connection problem
2020-07-10 08:53:10 - last edited 2020-07-10 08:56:29

@nava46 

Hello,

 

Did you have a stable connection from the ONT? Please connect your computer to the ONT then check if it has a stable connection.

 

When it loses the Internet, if you didn't go through the quick setup, just wait for the router to recover the Internet,are you able to get the Internet finally? 

 

If it can recover without go through the quick setup, how long did you need to wait?

 

You can also try to unplug the cable from LAN4/WAN port or reboot the router when it loses the Internet, then check if it can recover the Internet immediately.

 

Have a nice day!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1082

Replies: 1

Related Articles