Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-08-12 20:11:02 - last edited 2020-08-14 02:36:04

I brough tp-link router XN020-G3v. My ISP is BSNL, India. I configured data using PPPoE and internet connection is working.

 

I am trying to configure VOICE(telephone), but its not working. Below are the configurtion details

 

Advanced -> Telephony

VoIP Service Provider: Others
SIP Registrar Address, SIP Outbound Proxy and SIP Proxy Server Address: tn.ftthvoip.bsnl.in

 

BSNL ISP asked me to setup dynamic IP with VLAN ID - 1831. 

 

But i am getting account[91***********(0)] registration failed error message in logs.

 

I tried to call technical support team, but no luck. Someone please help me on this. Thanks a lot in advance.

 

 

 

  0      
  0      
#1
Options
12 Reply
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-08-14 09:28:10

@Ponraj

 

Good Day,

Have you seen this FAQ:

https://www.tp-link.com/support/faq/2020/

and where did you get this modem, from your internet service provider, or you bought it by yourself;

Thank you~

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-08-19 19:21:03

@Ponraj 

how did you solve" Gpon disconnected error " .mine doesn't register .vendor says to that gpon is not supported.

  0  
  0  
#3
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-08-21 14:10:31

@sujeet2555 even i am facing the same problem follwed the linnk  you provided but of no use

hope to get assisatance as  soon as possible

 

  0  
  0  
#4
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-08-28 00:30:17

@d_p @sujeet2555 

Hey,

Since it is a special customized model for internet service provider, the web interface has already been re-modified by the ISP.

So as for the advanced features, we sincerely suggested that you could have a check with the local service provider.

Thank you very much!

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#5
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-09-21 17:31:36

I am also Facing the Same Below Issue,

 

I brough tp-link router XN020-G3v. My ISP is BSNL, India. I configured data using PPPoE and internet connection is working.

 

I am trying to configure VOICE(telephone), but its not working. Below are the configurtion details

 

Advanced -> Telephony

VoIP Service Provider: Others
SIP Registrar Address, SIP Outbound Proxy and SIP Proxy Server Address: tn.ftthvoip.bsnl.in

 

BSNL ISP asked me to setup dynamic IP with VLAN ID - 1831. 

 

But i am getting account[91***********(0)] registration failed error message in logs.

 

I tried to call technical support team, but no luck. Someone please help me on this. Thanks a lot in advance.

 

 

Any Solution ?? Please Update

  0  
  0  
#6
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2020-09-21 19:18:30

@DAVIS3 How do you get past the gpon registration error in that tplink router .Vendor said that the network is epon so a gpon router will not work .so i have to buy another xpon ONU/ONT.i configured my data and SIP by myself as BSNL or vendor were not giving me the settings or configure my ONT/ONU. 

  2  
  2  
#7
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2021-03-02 18:29:57
I am facing the same issue . Please help me if your problem was solved . Thanks in advance
  0  
  0  
#8
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2021-03-03 17:29:46

@Natarajan Sorry for delayed response. Yes, i resolved my issue. Actually there is an issue with original or default firmware. TP Service team has provided the alternative firmware. After upgrading, even VOIP is working perfectly from last 8 months. Kindly check with TP-Link service team. 

  0  
  0  
#9
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2021-03-03 17:29:59

@Natarajan Sorry for delayed response. Yes, i resolved my issue. Actually there is an issue with original or default firmware. TP Service team has provided the alternative firmware. After upgrading, even VOIP is working perfectly from last 8 months. Kindly check with TP-Link service team. 

  0  
  0  
#10
Options
Re:Need technical assistance to configure BSNL VOIP - Tp-link Model No - XN020-G3v
2021-07-06 17:09:07

@Ponraj i bought xn020-g3v model , and could not connect to bsnl ftth. Pls advice and share the file/ firmware you updated. Email: sushiljk@hotmail.com. It shows" gpon disconnected ". No tx or rx power shown , when accessing system through tplink 

  0  
  0  
#11
Options

Information

Helpful: 0

Views: 6423

Replies: 12

Related Articles