Home Network Community > All Threads > TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
< All Threads

TP-Link MR600 - Error Code 4728 MAC Whitelist Limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link MR600 - Error Code 4728 MAC Whitelist Limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
2020-08-22 17:49:21
Model: Archer MR600  
Hardware Version: V1
Firmware Version: 1.1.0 0.9.1 v0001.0 Build 190412 Rel.66770n

Good evening,

I have an MR600 V1 modem router and I have the same problem reported for an MR6400 modem router (I don't see an answer to this report):

in the Advanced> Security> Access Control folder, after 31 MAC addresses entered to build a Whitelist, when I try to enter another MAC, the MR600 tells me - Error code: 4728 The number of added lines has reached the limit -.

Is this really a limitation of TP-Links modem router?

The maximum number of MAC addresses for a Whitelist (or Blacklist) is 31?

Thank you

  1      
 
  1      
 
#1
Options
4 Reply
Re:TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
2020-08-25 09:56:47

@Joe_Miller 

Good day.

Thank you very much for your kind reply.

There is an imitation of the access control profile and the maximum number is 32.

As for the 31, it is still quite strange.

Would you please double-check whether it is 31 or 32?

If it is 31, a picture attached would be highly appreciated.

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  1  
  1  
#2
Options
Re:TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
2020-10-14 07:46:45

@Sunshine 

Hi

I get a similar limit (max 31 devices) with my AC1600V.  I find this white list limit an obstacle.  With IOT devices on my home network, 32 devices is a limit that can easily be reached.

Please advise modems that have the ability to list more than 32 devices?

Thanks

  1  
  1  
#3
Options
Re:TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
2020-11-22 11:15:05

@Sunshine 

same problem here with archer vr400 1200ac

whitelist limit 31 device 

  3  
  3  
#4
Options
Re:TP-Link MR600 - Error Code 4728 MAC Whitelist Limit
2020-11-22 20:10:42

@Sunshine 

Good evening,

I confirm that the limit for MR600 is 31 MAC addresses in the whitelist and, as @wiseone says, nowadays there are few, given the large number of IOT that are installed even in a normal home.

Too bad: I have to give up an extra security, perhaps easily overcome by expert hackers as you read on the web, but it certainly works against common users.

Best regards

 

File:
Error_4728.jpgDownload
  1  
  1  
#5
Options

Information

Helpful: 1

Views: 1758

Replies: 4

Related Articles
TL-MR6400 Error code: 4728 MAC whitelist limit
1250 0
Error Code #1 : Internal Error :TP Link MR600
3816 1
MR600 V3 error code 1, Internal error
1047 0
MR600 Can't upgrade ISP (error code: 71212)
620 0
Archer MR600 v2 manual band selection giving error code:89534 no available band
11580 2
tp-link mr600
1465 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.