Archer VR600 V2 will not maintain a connection PC between hibernation/restart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer VR600 V2 will not maintain a connection PC between hibernation/restart

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer VR600 V2 will not maintain a connection PC between hibernation/restart
Archer VR600 V2 will not maintain a connection PC between hibernation/restart
2020-08-31 16:48:02 - last edited 2020-09-10 03:42:04
Model: Archer VR600v  
Hardware Version: V2
Firmware Version: 0.2.0 0.9.1 v0074.0 Build 170504 Rel.68210n

Hi all,

 

I recently upgrade from my old TD-W8961N to an Archer V600, and have had consistent issues with a wired connection to my PC. I normally put my PC into hibernate between usage and when I come back I will have an incredibly sluggish connection to the Internet until I disable and re-enable my network adapter via the control panel. It's quite frustrating, does anyone know what could be causing this? It is setup in the exact same way the old modem router was. The connection works fine wirelessly, and has been tested with numerous devices both on 2.4GHz and 5Ghz bands.

 

Many thanks.

  0      
  0      
#1
Options
1 Accepted Solution
Re:Archer VR600 V2 will not maintain a connection PC between hibernation/restart-Solution
2020-09-10 03:40:43 - last edited 2020-09-10 03:42:04

@PP2804 

Good day,

Thank you very much for your time and patience.

Have you tested with a different computer to see If the same issue still existed?

If the computer was connected by Wi-Fi and put into hibernate between usage, would it still be sluggish when come back?

There is a new firmware ArcherVR600v(EU)_V2_200624

https://static.tp-link.com/2020/202006/20200628/Archer_VR600v(EU)V2_200624.zip

if possible, please update the firmware to be the latest one first.

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Archer VR600 V2 will not maintain a connection PC between hibernation/restart-Solution
2020-09-10 03:40:43 - last edited 2020-09-10 03:42:04

@PP2804 

Good day,

Thank you very much for your time and patience.

Have you tested with a different computer to see If the same issue still existed?

If the computer was connected by Wi-Fi and put into hibernate between usage, would it still be sluggish when come back?

There is a new firmware ArcherVR600v(EU)_V2_200624

https://static.tp-link.com/2020/202006/20200628/Archer_VR600v(EU)V2_200624.zip

if possible, please update the firmware to be the latest one first.

Thank you very much.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 831

Replies: 1

Related Articles