VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN
VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN
2020-10-06 07:55:06 - last edited 2020-10-12 03:35:59
Model: Archer VR2800  
Hardware Version: V1
Firmware Version:

VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN

 

This firmware does not work on FTTN NBN connections in Perth.  Drops out ever ten minutes.  Had to downgrade to the previous firmware Archer VR2800(EU)_V1_200227.

 

Can TP-Link please fix the newer firmware so it is stable on FTTN connection.  I think there were constant DNS checking traffic that was overloading the connection and the NBN was drop the connection off, probably becaues of a dos.

 

The old firware is still works without a problem.

 

Radar

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN-Solution
2020-10-09 22:22:44 - last edited 2020-10-12 03:35:59
I have the latest firmware. FTTN in Canberra. No problems. When you upgraded to the latest firmware, did you reset to factory defaults afterwards, before implementing custom changes? For my DNS, I actually use 1.1.1.1 (see https://1.1.1.1/dns) rather than let my ISP provide DNS details.
Recommended Solution
  2  
  2  
#2
Options
2 Reply
Re:VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN-Solution
2020-10-09 22:22:44 - last edited 2020-10-12 03:35:59
I have the latest firmware. FTTN in Canberra. No problems. When you upgraded to the latest firmware, did you reset to factory defaults afterwards, before implementing custom changes? For my DNS, I actually use 1.1.1.1 (see https://1.1.1.1/dns) rather than let my ISP provide DNS details.
Recommended Solution
  2  
  2  
#2
Options
Re:VR2800 - Firmware ArcherVR2800(EU)_V1_200710 - Drop outs NBN FTTN
2020-10-29 16:31:35

@Radar23 My still shows 0.5.0 0.9.1 v006c.0 Build 200708 Beta.53465n, and it's working fine.  I don't see any updates when i click "Check for updates"

In Perth connected to FTTN as well.

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1036

Replies: 2

Related Articles