Wired connection doesn't work with tplink ac1200 archer c6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wired connection doesn't work with tplink ac1200 archer c6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wired connection doesn't work with tplink ac1200 archer c6
Wired connection doesn't work with tplink ac1200 archer c6
2020-12-06 19:48:20 - last edited 2020-12-07 07:57:10
Model: Archer A2  
Hardware Version: V2
Firmware Version:

For some reason, I can't access the control panel via wired connection but only if I connect to the router WiFi https://www.tp-link.com/us/home-networking/wifi-router/archer-c6/ (I've just have powered on and connected my pc to ETH1 to see if I was able to access 192.168.0.1 but I can only access it via Wifi)

[I chooses a random Model because I can't find the right one]

  0      
  0      
#1
Options
1 Accepted Solution
Re:Wired connection doesn't work with tplink ac1200 archer c6-Solution
2020-12-07 07:56:56 - last edited 2020-12-07 07:57:10

@NicoC the issue was I had my network card with a static IP that wasn't ok with the router. I switched to dynamic IP on the card and now works also via wire

Recommended Solution
  4  
  4  
#4
Options
3 Reply
Re:Wired connection doesn't work with tplink ac1200 archer c6
2020-12-06 23:16:20 - last edited 2020-12-06 23:17:52

@NicoC 

 

Follow this guide. Then turn off your computer's wi-fi and connect by ethernet cable to the router LAN port.

Start a browser and open the IP address you discovered when following the guide above.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Wired connection doesn't work with tplink ac1200 archer c6
2020-12-07 06:51:51

@Ivaylo 

 

I've already done that as, to access via WiFi it needs the router IP (which is 192.188.0.1 )

 

Problem is that if I'm connected via ethernet instead of WiFi it says it can't be reached

  0  
  0  
#3
Options
Re:Wired connection doesn't work with tplink ac1200 archer c6-Solution
2020-12-07 07:56:56 - last edited 2020-12-07 07:57:10

@NicoC the issue was I had my network card with a static IP that wasn't ok with the router. I switched to dynamic IP on the card and now works also via wire

Recommended Solution
  4  
  4  
#4
Options

Information

Helpful: 0

Views: 1985

Replies: 3

Related Articles