Archer c7 : Ping high latency several time. not stable. FB vid lag

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer c7 : Ping high latency several time. not stable. FB vid lag

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer c7 : Ping high latency several time. not stable. FB vid lag
Archer c7 : Ping high latency several time. not stable. FB vid lag
2020-12-12 04:53:06 - last edited 2020-12-18 10:44:31
Model: Archer C7  
Hardware Version: V2
Firmware Version:

hi, all,

 

seek your assist if any of you got somes experiance.

 

buy c7 last few week. problem start several days after buy. return to seller, they said its ok.

 

but its not ok for me.

 

problem is : lag while play vid in FB, 

 

checking via laptop cmd : ping to gateway router : 192.168.0.1

 

got unsttatisfied result.

 

C:\Users\09029>ping 192.168.0.1 -t

Pinging 192.168.0.1 with 32 bytes of data:
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=16ms TTL=64
Reply from 192.168.0.1: bytes=32 time=8ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=30ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=53ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=56ms TTL=64
Reply from 192.168.0.1: bytes=32 time=5ms TTL=64
Reply from 192.168.0.1: bytes=32 time=5ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=15ms TTL=64
Reply from 192.168.0.1: bytes=32 time=17ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=13ms TTL=64
Reply from 192.168.0.1: bytes=32 time=5ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=6ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=5ms TTL=64

 

 

 

below, i gave summary

 

Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=8ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64

Ping statistics for 192.168.0.1:
    Packets: Sent = 661, Received = 661, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
    Minimum = 0ms, Maximum = 828ms, Average = 5ms

 

in 2 minute, got highers ping 828ms.

 

what i have done 

1. reset router, reenter all unifi password 2 times

2. off ipv6

3. off all other wifi bridge.

4. change location to non interfereance location.

 

result same. 

 

old router, d-link  from TM, now using back old router.

 

thank you buddy

  0      
  0      
#1
Options

Information

Helpful: 0

Views: 529

Replies: 0

Related Articles