This morning I saw that there was an extreme amount of LOG entries referring to RSSI issues.

I have found out that the offending device (44:07:0B:8A:C3:2D)  is a Google Nest Hub.

If I read the log correctly, it states that the RSSI threshold has been exceeded. And that I should change the threshold. I don't know where to find that setting. Or is there something else anyone can suggest? Yes I know I can disconnect the Nest Hub ).

Thanks in advance

Rob

Thu Jan 28 08:01:02 2021 daemon.notice nrd[6993]: estimatorHandleValidBeaconReport: Failed to find serving BSS for 44:07:0B:8A:C3:2D

Thu Jan 28 08:01:08 2021 daemon.err nrd[6993]: triggerMonSteering: Failed to get uplink rssi for 44:07:0B:8A:C3:2D

Thu Jan 28 08:01:08 2021 daemon.notice nrd[6993]: estimatorPerformMeasurement: Do 11k measuremrent for 44:07:0B:8A:C3:2D on channel 48 from serving BSS APId 255 ChanId 4 ESSId 0

Thu Jan 28 08:01:08 2021 daemon.notice nrd[6993]: wlanifBSteerEventsHandleBeaconReport: Beacon report from 44:07:0B:8A:C3:2D: APId 255 ChanId 48 ESSId 0 rcpi: -70

Thu Jan 28 08:01:08 2021 daemon.notice nrd[6993]: wlanifBSteerEventsHandleBeaconReport: Beacon report from 44:07:0B:8A:C3:2D: APId 255 ChanId 4 ESSId 0 rcpi: -57

Thu Jan 28 08:01:08 2021 daemon.notice nrd[6993]: stadbEntry_modifyTriggerThreshold: For client 44:07:0B:8A:C3:2D RSSI: 37 | RCPI: -57 | threshold RSSI: 38

------