Problem with TL-WPS510U connectied to HP Color Laserjet 1600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Problem with TL-WPS510U connectied to HP Color Laserjet 1600

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Problem with TL-WPS510U connectied to HP Color Laserjet 1600
Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-02-24 03:25:46
Region : Belgium

Model : TL-WPS510U

Hardware Version : V3

Firmware Version :

ISP : telenet.be


I installed the TP-WS510U in connection with a HP Color Laserjet 1600. The print request starts correctly but apparently the print spooler is not stopped which results in a continuously printing of the print job. Has someone any experience with this type of printer or the problem. The printer appears in the list of compatible printers from TP-Link.
Thanks for your suggestions.
  0      
  0      
#1
Options
5 Reply
Re:Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-02-24 15:47:32
Um, do you have the same issue when the printer is connected to the computer directly or when you print on another laptop wirelessly?
  0  
  0  
#2
Options
Re:Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-02-24 17:36:12
When then printer is connected directly through the USB cable there is no problem at all.
The firmware fersion of the TP-Link device is 6.04.48T-0021-168.
I notioced that there is a newer version available 6.04.48T- 0022-168.
Would it be wise to upgrade tot he newest version ?
  0  
  0  
#3
Options
Re:Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-02-24 17:39:04
When then printer is connected directly through the USB cable there is no problem at all.
The firmware fersion of the TP-Link device is 6.04.48T-0021-168.
I notioced that there is a newer version available 6.04.48T- 0022-168.
Would it be wise to upgrade tot he newest version ?

The problem remains the same when printing on another laptop.
  0  
  0  
#4
Options
Re:Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-03-03 17:14:07
Hi everybody,
I finally found the solution after many trials. Simply by unchecking the bi-directional funciont in the port property seemed so solve the problem, however I do not know what the consequence of that may be ? We will see.
  0  
  0  
#5
Options
Re:Problem with TL-WPS510U connectied to HP Color Laserjet 1600
2013-03-03 21:03:21
The Bi-directional is used when the printer has the ability to report ink levels, paper jams etc. By turning it off all that is likely to happen is that you you will not get a notification of those events. In other words you can can send data to your printer, but with Bidirectional turned off the printer cannot send data back to your PC.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1193

Replies: 5

Related Articles