Powerline tl-wpa8630 brick how to solve

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Powerline tl-wpa8630 brick how to solve

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Powerline tl-wpa8630 brick how to solve
Powerline tl-wpa8630 brick how to solve
2021-03-06 10:38:42
Model: TL-WPA8630 KIT  
Hardware Version: V2
Firmware Version: 2.2.2.1218-00_863012_161220_901

Hi, I have the following problem : 

I connected to the web page of the device and I was asked to update the firmware, so I visited the tp-link site and updated according to my model TL-WPA8630 KIT, at the end of the installation the powerline led has turned red (the second, icon like a house to be clear), i can do nothing to device and it remain in this state (green power led, red powerline led), after reading some forums it seems that the device is bricked, I cannot access the web page and if i try a manual reset, it doesn't work, and if I use the tpPLC application I am not allowed to do any operation on the device.

Is there a command line procedure to enter the device and unbrick it or other things I can do to restore the device factory firmware?

Thanks.

  8      
  8      
#1
Options