Home

Forums

Stories

Knowledge Base

Home Network Community > All Threads > How do I stop my vr400 stop changing the IP addresses?

< All Threads

How do I stop my vr400 stop changing the IP addresses?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How do I stop my vr400 stop changing the IP addresses?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

NZ_Wanderer

2021-04-19 22:36:26 - last edited 2021-04-20 02:24:49

Posts: 3

Helpful: 1

Solutions: 0

Stories: 0

Registered: 2021-04-19

How do I stop my vr400 stop changing the IP addresses?

2021-04-19 22:36:26 - last edited 2021-04-20 02:24:49

Model: Archer VR400

Hardware Version: V2

Firmware Version: 0.2.0 0.9.1 v0070.0 Build 170628 Rel.36958n

Hi all, I just bought the AC1200 (VR400) and have a slight problem I do not know how to solve..

I have 3 cameras that are connected via WiFi which the router picks up just fine, the problem is the router decided to change the IP address on the cameras which meant I had to go into the Ispy config file and chanfge them manually to what the router set them to..

Is there a way of telling the router to keep the IP it has set them to and not change it please?

1 Accepted Solution

terziyski

LV7

2021-04-20 00:33:42 - last edited 2021-04-20 14:00:06

Posts: 7141

Helpful: 5351

Solutions: 1219

Stories: 7

Registered: 2013-10-12

Re:How do I stop my vr400 stop changing the IP addresses?-Solution

2021-04-20 00:33:42 - last edited 2021-04-20 14:00:06

@NZ_Wanderer

Yes. there are two ways. One is called DHCP address reservation and the other one is static IP address.

When you've set your cameras to obtain their IP addresses by router's DHCP server, it could be changed when they are rebooted, power cut off or rebooting the router.

If you want each camera to have an authentic (permanent) IP address, which do not change over time, then address reservation is the feature you can use.

Another approach which may solve that too is to set your cameras with a static IP addresses outside your router's DHCP pool range.

It's up to you to decide which one is the best for you according to your network setup.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Recommended Solution

2 Reply

terziyski

LV7

2021-04-20 00:33:42 - last edited 2021-04-20 14:00:06

Posts: 7141

Helpful: 5351

Solutions: 1219

Stories: 7

Registered: 2013-10-12

Re:How do I stop my vr400 stop changing the IP addresses?-Solution

2021-04-20 00:33:42 - last edited 2021-04-20 14:00:06

@NZ_Wanderer

Yes. there are two ways. One is called DHCP address reservation and the other one is static IP address.

When you've set your cameras to obtain their IP addresses by router's DHCP server, it could be changed when they are rebooted, power cut off or rebooting the router.

If you want each camera to have an authentic (permanent) IP address, which do not change over time, then address reservation is the feature you can use.

Another approach which may solve that too is to set your cameras with a static IP addresses outside your router's DHCP pool range.

It's up to you to decide which one is the best for you according to your network setup.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".

Information

Helpful: 1

Replies: 2

How do I stop my vr400 stop changing the IP addresses?

How do I stop my vr400 stop changing the IP addresses?

Information

Voters 1

Tags