Home Network Community > All Threads > Connection is unstable (cable or WiFi) - Archer C6
< All Threads

Connection is unstable (cable or WiFi) - Archer C6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Connection is unstable (cable or WiFi) - Archer C6

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Connection is unstable (cable or WiFi) - Archer C6
Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 09:53:46 - last edited 2021-04-22 11:48:34
Model: Archer C6  
Hardware Version: V2
Firmware Version: 1.3.6 Build 20200902 rel.65591

Hi guys, I have an issue with my WiFi Router Archer C6. 

 

Firmware: 1.3.6 Build 20200902 rel.65591(4555)

Hardware: Archer C6 v2.0

 

My internet connection is unstable. This problem is see, when:

1. I have online call with my colleagues via WiFi - for example 2 minutes is call without problems, then some seconds (5-10 seconds) screen of my colleagues is freeze and I don´t see and can't hear anything. After 5-10 seconds all is back .. And this "ritual" is repeat all the time. WiFi 5G

2. I play online game on my PC (which is connected by cable ! ) ... 5 minutes is game OK, but then I have lags (FIFA 21). 

 

I am not sure, if it can be possible, but when more devices are online in my home, than internet connection is unstable.

 

My internet speed is via cable by speedtest.net: Ping: 1ms, Download: 90Mbps, Upload: 94Mbps

My internet speed is via WiFi 5G by speedtest.net: Ping: 3ms, Download: 71Mbps, Upload: 90Mbps

 

But I tried one attempt: I start check internet connection in one moment on two devices (one connected by cable, second connected by WiFi 5G) and the speeds are much smaller and graph of speeds are unstable (on both devices).

 

Thanks for help.

 

 

  0      
 
  0      
 
#1
Options
9 Reply
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 15:35:57

@LukasTL 

 

Try the beta FW from this thread. Disable OneMesh feature and test.

You can always revert back to the current FW if this doesn't help.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 16:23:23

@terziyski Thanks for the answer. In the thread, what you sent there is firmware 1.3.0 Build EU 20200402 rel.52000. But now I have a higher version of firmware - 1.3.6 Build 20200902 rel.65591. So should I try a version of firmware, that is older than the newest? 

  0  
  0  
#3
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 16:38:02

@LukasTL 

 

In the Kevin's post (Recommended solution) there are 3 options - choose the right one according to your region:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 19:21:15 - last edited 2021-04-22 19:24:49

@terziyski Thanks, already tried with beta firmware recommending in the thread, but still the same as before. OneMash function disabled too.

  0  
  0  
#5
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-22 21:22:30 - last edited 2021-04-22 21:54:36

@LukasTL 

 

Make sure your wireles security settings for both bands are:

 

 

Check for wireless interference arround you, installing "Wi-Fi Analyzer" app on your phone and scan.

If there is, change the wireless channel to less crowded one (both bands).

 

Also it's a good idea to check your ISP connection - if you can plug your computer direcly (bypassing C6) and test if the connection is stable.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-23 07:43:47

@terziyski I checked WiFi interference and set the best channels for me. Wireless settings I have the same as you sent in the screenshot. And if I unplug the cable from the router and put it directly to my computer, the internet connection is stable. But If I test the internet connection via router Archer C6, but not in one moment with another device, the internet connection is stable too. Problem is when I test the internet connection in ONE moment with two devices (one device is connected via cable and the second via wireless connection). Then the internet connection is not stable (on one device - it doesn´t matter, on what device. In one time on device witch is connected via cable .. in a second time on device witch is connected via wireless. So this is a problem for me. When two devices are communicate with the router in one moment.

  0  
  0  
#7
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-23 14:19:40

@LukasTL 

 

I just realized the way you try to test your internet speed. I have mimssed that from your firts post.

You should not test your internet speed from two different devices at the same time.

I am quotting a former employee of speedtest.net:

"

Q: Could running multiple speedtest.net tests at the same time slow down your results?

A: Not only will it lead to slower results, but those results will also be incorrect. Speedtest.net has to compete for bandwidth with everything else that could be using your network connection. So if you have a YouTube video downloading at, say, 1mbps while you're running a speed test, then your Speedtest.net result will be about 1mbps slower than the maximum speed your connection is delivering.

This is why we typically recommend testing when there isn't any other internet activity going on: so we can completely saturate your connection all by ourselves, and get a higher & accurate reading of your connection speed.

"

Judging by the test results from your first post I would assume your internet speed is 100 mbps and your results are fine.

If your current bandwidth is not enough for the stuff you do at a particular moment maybe you should think about increasing your internet speed with your ISP.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  3  
  3  
#8
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-23 16:29:43

@terziyski Ah okay I understand. But when I had an old router D-link DIR600 there was all OK. For example, I have an online conference with colleagues via WiFi on a notebook without any network problems. During the conference, I started PC via cable and I browse the internet in the one moment with conference and then conference on the notebook via WiFi started freeze and unstable. But with old router Dlink I didn´t have this problem. 

  0  
  0  
#9
Options
Re:Connection is unstable (cable or WiFi) - Archer C6
2021-04-23 17:00:43

@LukasTL 

 

On the next conference call try to connect both devices (PC, notebook) via ethernet cable to the C6 so you can isolate the issue and see if it's related to the C6 Wi-Fi or the C6 itself.

Or if it's possible make the conference call from the PC and browse the internet from the notebook then observe.

If you keep your old router replace them and test to confirm if any difference.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1166

Replies: 9

Related Articles
Archer C6 unstable Wifi connection
9622 1
Archer C6 no wifi/ehternet
687 0
OneMesh with Archer C6 + Powerline = unstable connections
793 0
Archer C6 losing internet connection
2515 0
Archer c6 "no internet access" and sometime not connecting to the wifi saying "limited connection"
75060 12
[Solution] Fixed the internet unstable connection issue with my Archer C6
31151 10
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.