AX11000 Clone Existing WiFi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX11000 Clone Existing WiFi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX11000 Clone Existing WiFi
AX11000 Clone Existing WiFi
2021-05-13 12:22:18 - last edited 2021-05-13 16:26:31
Model: Archer AX11000  
Hardware Version: V1
Firmware Version: 1.1.1 Build 20200716 rel. 84595

I connected my new AX11000 router to my existing VDSL modem, and want to clone the existing WiFi that I have, so that I can just switch off the WiFi on my modem without having to reconnect all my devices to a new WiFi.

 

No sure if this is possible, I see a WPS section in AX11000 but I believe that is where I get my devices to connect to AX11000, not clone the existing WiFi.

 

Anyone know if this is possible on this router, and if so, how do I get it to clone my existing WiFi?

  0      
  0      
#1
Options
1 Accepted Solution
Re:AX11000 Clone Existing WiFi-Solution
2021-05-13 15:13:34 - last edited 2021-05-13 16:26:31

@Sokpan 

 

Turn the VDSL router wi-fi off and copy these wireless settings from the VDSL modem/router to the AX11000 like so:

 

 

If the VDSL device is dual band you have to do the same for 5 GHz band as well.

After saving the changes your wi-fi devices should re-connect automatically.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
2 Reply
Re:AX11000 Clone Existing WiFi-Solution
2021-05-13 15:13:34 - last edited 2021-05-13 16:26:31

@Sokpan 

 

Turn the VDSL router wi-fi off and copy these wireless settings from the VDSL modem/router to the AX11000 like so:

 

 

If the VDSL device is dual band you have to do the same for 5 GHz band as well.

After saving the changes your wi-fi devices should re-connect automatically.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  3  
  3  
#2
Options
Re:AX11000 Clone Existing WiFi
2021-05-13 16:26:09

@terziyski 

 

Thanks for the detailed instructions.  Will try and see if that works, found similar info from another site and seems it worked for that person as well.

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 703

Replies: 2

Related Articles