The router does not provide me with the correct speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

The router does not provide me with the correct speed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The router does not provide me with the correct speed
The router does not provide me with the correct speed
2021-06-09 13:30:12 - last edited 2021-06-09 13:42:55
Model: TL-WR940N  
Hardware Version: V6
Firmware Version: 3.20.1 Build 200316 Rel.34392n (4555)
Hello, I have a problem with the router, I have a contracted internet speed of 300mbps, but when I do a test from the pc, the router only gives me 100mbps.
I have the TP-Link configured in "access point" mode.
The cable that goes from the main router to the TP-Link is category 7 and the one that goes from the TP-Link to the pc is also category 7.
If I connect the main router directly to the pc, skipping the TP-Link, I have the correct speed, 300mbps.
  0      
  0      
#1
Options
1 Reply
Re:The router does not provide me with the correct speed
2021-06-09 17:20:20 - last edited 2021-06-09 17:28:49

@Menosmola 

 

That's because the TL-WR940N has only 100mbps ports by specification - hence the bottleneck when using it with your main router via ethernet cable (even with category 7 cable).

What you could do to utilize the speed between TL-WR940N and your main router is to set TL-WR940N in Range Extender mode.

Teoretically if you configure TL-WR940N in Range Extender mode you can reach about 225 mbps via wireless connection, but that speed depends on wireless interference around you, distance and obstacles between the routers - why don't give it a try.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  1  
  1  
#2
Options

Information

Helpful: 0

Views: 577

Replies: 1

Related Articles