Home Network Community > All Threads > Archer c6(us) v3.20 heating problem
< All Threads

Archer c6(us) v3.20 heating problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer c6(us) v3.20 heating problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer c6(us) v3.20 heating problem
Archer c6(us) v3.20 heating problem
2021-06-17 19:55:42
Model: Archer C6U  
Hardware Version: V3
Firmware Version: V 1.0.5

My router under surface is very hot to touch.is it normal?

  0      
 
  0      
 
#1
Options
8 Reply
Re:Archer c6(us) v3.20 heating problem
2021-06-17 21:34:51

@MagNeto 

 

It depends where you've placed the device.

In general, it should be positioned in a well ventilated place on a firm surface.

If you believe it's getting too hot, you can put some spacers underneath or fix it vertically with the help of the two holes on the bottom:

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-19 16:27:52

@Magneto olha qual padrão de segurança está no wifi,se é o wpa 2/wpa3 ou wpa/wpa 2.

O wpa2/3 está fazendo o roteador aquece mesmo,como tbm está limitando a banda de 5ghz

  0  
  0  
#3
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:20:35

@terziyski 

My router is placed in a well ventilated space and also the router is placed on a sleeper to get better air circulation in the under surface...i checked the temperature of the under surface and it showing 43°c ( ambient temperature is 29°c).is this a software issue or is normal?

  0  
  0  
#4
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:23:27

@Esmy my wifi  password setting is wpa/wpa2 with aes

  0  
  0  
#6
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:26:02

@MagNeto 

 

If your router is working as it should then that's normal.

Sometimes to lower the working temperature if device behaves abnormal, I've seen a suggestions to lower the wireless radio transmission power from high to medium.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#7
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:30:52

@terziyski as of now router is working perfectly fine but i am afraid of long term issue which may occur with the router because of such high temperature.

 

 

  0  
  0  
#8
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:32:13

@terziyski can you check your router temperature?

  0  
  0  
#9
Options
Re:Archer c6(us) v3.20 heating problem
2021-06-23 15:36:51 - last edited 2021-06-23 15:55:40

@MagNeto 

 

I would leave it as it is. I believe that's normal for this time of the year - all my devices experiencing higher temperatures during summer season.

My router is two floors above and I don't have an IR thermometer, but on touch it feels warm - that's normal.

Your highest ambient temperature for using the device is 40℃.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#10
Options

Information

Helpful: 0

Views: 1568

Replies: 8

Related Articles
Need Firmware For Archer C6 v3.20 (US)
627 1
Need Updated Firmware For Archer C6 V3.20(US)
5294 5
Archer C6 v3.20 problem
412 0
Archer C6 V3.20 with DECO E4
1344 0
Having Some Weird Issues on Archer C6 US V3.20. Please give me some solution.
1166 0
Need the updated firmware for Archer C6 v3.20 (US)
7527 16
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.