TL-WR702N Client Mode with a L2 switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WR702N Client Mode with a L2 switch

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WR702N Client Mode with a L2 switch
TL-WR702N Client Mode with a L2 switch
2013-07-18 03:31:46
Region : UnitedKingdom

Model : TL-WR740N

Hardware Version : V4

Firmware Version :

ISP :


Hi All,

I work in networking i have a customer who uses a 4g wifi router with no ethernet ports, however they now want a LAN. They do not wish to purchase a 4g router at the moment but they do have a TL-WR702N unused in their office.

Now a question i have is the 4G router gives out a dhcp range of 192.168.0.x /24 if i connect the TL-WR702N in Client mode and plug the TL-WR702N ethernet port into a 12 port switch will all users connected to the switch get an IP? or does client mode on get 1 IP address ?

Thanks

Ben
  0      
  0      
#1
Options
1 Reply
Re:TL-WR702N Client Mode with a L2 switch
2013-07-22 16:08:22
In client mode, DHCP is disabled on TL-WR702N. So the device connected to the client by cable obtains IP address from the 4G wifi router.
  0  
  0  
#2
Options