TL-WPA4220

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-WPA4220

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-WPA4220
TL-WPA4220
2021-10-12 14:10:11 - last edited 2021-10-12 18:21:43
Model: TL-WPA4220  
Hardware Version: V5
Firmware Version:

Hi There, I have an existing powerline network of three TL-PA4010P adapters to extend my wired connection around the house. They are working just fine. I have now purchased a single wireless adapter (TL-WPA4220) just to extend my wifi in a spare bedroom. I was under the impression these adapters are compatible with each other. However, I have tried everything possible but I am unable to get the powerline LED to activate on the new adapter. Any ideas if I'm doing something wrong?? 

  0      
  0      
#1
Options
1 Accepted Solution
Re:TL-WPA4220-Solution
2021-10-12 18:21:00 - last edited 2021-10-12 18:21:43

@BobbyBunny Finally figured it out.......... Once the TL-WPA4220 is plugged in and powered up, press and hold the wifi button to switch off the wifi facility. The green wifi LED will go off. Then 'pair' the TL-WPA4220 with one of the existing adapters. Once completed, the powerline LED should then be on. Re-activate the wifi functionality be pressing and holding the wifi button until the green wifi LED is on.......job done! 

Recommended Solution
  1  
  1  
#2
Options
4 Reply
Re:TL-WPA4220-Solution
2021-10-12 18:21:00 - last edited 2021-10-12 18:21:43

@BobbyBunny Finally figured it out.......... Once the TL-WPA4220 is plugged in and powered up, press and hold the wifi button to switch off the wifi facility. The green wifi LED will go off. Then 'pair' the TL-WPA4220 with one of the existing adapters. Once completed, the powerline LED should then be on. Re-activate the wifi functionality be pressing and holding the wifi button until the green wifi LED is on.......job done! 

Recommended Solution
  1  
  1  
#2
Options
Re:TL-WPA4220
2021-10-12 18:36:26

@BobbyBunny 

Hi

I have exactly the same problem with TL-WPA220 just bought, that I'm trying to pair with my existing TL-PA4010P. You suggest to push and hold the wifi button, but what do you mean with wifi button? You mean the pairing button? Otherwise, I can't see a WiFi button on my device.

Thanks for your help

F

  0  
  0  
#3
Options
Re:TL-WPA4220
2021-10-12 18:53:28

@FDemi Look at the front of the device at the green wifi LED. Carefully run your finger across the front of it and you will feel a slightly raised edge. That is the button. Not the pairing button on the underside.

  0  
  0  
#4
Options
Re:TL-WPA4220
2021-10-12 20:49:04
Thanks a lot!!! I got it and I finally paird the device with the other!!! Your post has been so helpful, more than the TP-Link user guide!
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1099

Replies: 4

Related Articles