Drop connection between wpa4220 and pa4010

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Drop connection between wpa4220 and pa4010

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Drop connection between wpa4220 and pa4010
Drop connection between wpa4220 and pa4010
2021-10-18 15:48:23
Model: TL-WPA4220 KIT  
Hardware Version: V1
Firmware Version:

Hi, i have problem with my set. I have 1x wpa4220 and 2x pa4010. Im using it to send video between security cameras and recorder.


Cameras are set to static IPs, recorder also static IP. No router in network, all is on static IPs on devices.

1x pa4010 is connected to recorder, 4 cameras are connected with WIFI to wpa4220, 2 cameras are connected with switch and next to pa4220, one camera is connected to second pa4010

 

Problem is that it works few hours and it drops connection between wpa4220 and one pa4010 connected to recorder, second pa4010 is still conected with first pa4010 and recorder is record video from this one camera.

I must power off and power on a first device pa4010 connected to recorder and then it starts working also for few hours with rest of network.

 

What can i do? I thinked that i have fault first pa4010 but i changed it to second one and problem still exist, it still drops connection with wpa4220

 

  0      
  0      
#1
Options