Home Network Community > All Threads > Extender RE305 and different subnet class
< All Threads

Extender RE305 and different subnet class

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Extender RE305 and different subnet class

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Extender RE305 and different subnet class
Extender RE305 and different subnet class
2021-10-28 13:03:53 - last edited 2021-11-01 07:21:44
Model: RE305  
Hardware Version: V3
Firmware Version:

Hello,

I have a question. 

 

On my cellphone I have set an hotspot using tethering and I connected my tplink to it.

Android do not allow the change of the IP address so in this case my tplink has assigned the IP 192.168.212.111

 

Then I connected a tplink switch to the tplink extender and I connected 4 devices to the tplink switch.

 

All my devices now have an IP with the class 192.168.212.x

 

What I need is to be able to assign a different class to all the devices connected with the LAN cable to the extender.

So, for example, I would like my devices to have the class 192.168.80.x

 

Is it possible to do that? If so, how?

 

thank you

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Extender RE305 and different subnet class-Solution
2021-10-29 12:10:37 - last edited 2021-11-01 07:21:44

@lorife 

 

The RE will give IP addresses within the same subnet to devices connected after.

If you need a different subnet for them, you'll need a wireless router instead for that purpose.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Extender RE305 and different subnet class-Solution
2021-10-29 12:10:37 - last edited 2021-11-01 07:21:44

@lorife 

 

The RE will give IP addresses within the same subnet to devices connected after.

If you need a different subnet for them, you'll need a wireless router instead for that purpose.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
Recommended Solution
  0  
  0  
#2
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:29:14

@terziyski thank you.

 

But I need a router after the extender right? the router cannot get the signal from the wifi, correct?

 

  0  
  0  
#3
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:45:24

@lorife 

 

That's correct. In fact you need a router in place of the switch.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#6
Options
Re:Extender RE305 and different subnet class
2021-10-29 12:49:18
ok great. thank you for the clarification
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1055

Replies: 4

Related Articles
A different ip class in my extender
2394 0
RE305 Reanaming if using more than one extender
2231 0
IoT Network Option for Extender Re305
1235 3
How do I set a different password for my Range Extender RE305 (different from my Router WIFI Key)
2768 1
5GHz Frequency is not detected by RE305 Range Extender
8557 0
Problem with re305 extender
2637 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.