Error 7500
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello guys,
I am trying to configure the WPA2 Enterprise settings on my archer c3150 router, using it as access point. when I try to save my configurations I get the 7500 error message.
Error code: 7500
Wireless settings conflict. Please verify the settings, e.g. 1.WEP security or WPA/TKIP encryption is not supported with 11n-only wireless mode enabled; 2.WEP security or WPA/WPA2 Enterprise is not supported when WPS is enabled.
Clearly from the above settings: - for e.g. 1. I don't have 11n only enabled, 2. There is no obvious option that I can see to disable WPS.
Thanks,
Sorry about that. The above procedure will disable the router PIN only.
What you can do is:
1.Switch the device back in wireles router mode.
2.Disable WPS feature from here:
3.Switch back the device in AP mode and test if that will resolve the issue.
Sorry about that. The above procedure will disable the router PIN only.
What you can do is:
1.Switch the device back in wireles router mode.
2.Disable WPS feature from here:
3.Switch back the device in AP mode and test if that will resolve the issue.