VR600 x2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VR600 x2

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VR600 x2
VR600 x2
2022-02-07 18:47:54
Model: Archer VR600  
Hardware Version: V2
Firmware Version:

hi, I have two valid VR600 v.2 routers, one is Voip, can I connect them together in order to extend the wifi? which procedure or / and configurations to do for the connections?. Thank you.

  0      
  0      
#1
Options
4 Reply
Re:VR600 x2
2022-02-08 14:55:16

@Pietro_vr 

 

Here's the guide for setting VR600 in AP mode.

Keep both devices in DSL Modem Router mode.

Upon finishing configuration and rebooting the second VR600 AP (connecting it to the main VR600 as LAN => LAN) you should be able to use it for extending your wireless coverage.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:VR600 x2
2022-02-09 10:43:30

@terziyski  Hi, having to connect them together, as the guide describes, does the ethernet cable have to be straight or crossed? Thank you.

  0  
  0  
#3
Options
Re:VR600 x2
2022-02-09 12:49:03

@Pietro_vr 

 

Although the VR600 could be with autosense capable ports, use a casual straight cable (CAT5e or CAT 6 since it's a gigabite modem router) for that purpose.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:VR600 x2
2022-02-11 14:14:38

@terziyski The connection between the two VR600 works only with the straight cable, it does not go with the crossover. I solved the problem with the wifi bridge.
Thanks so much.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 451

Replies: 4

Related Articles