Home Network Community > All Threads > How to configure the two USB disks that connected to the router
< All Threads

How to configure the two USB disks that connected to the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to configure the two USB disks that connected to the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to configure the two USB disks that connected to the router
How to configure the two USB disks that connected to the router
2022-02-25 13:24:02
Model: Archer C4000  
Hardware Version: V3
Firmware Version: 1.03 build 20191026 rel.13901(5553)

my C4000 router has two USB connectors. I connected them to two USB disks for network storage.

can I give one disk with only "Network neighborhood" access while allowing another disk access through FTP(via Internet)? - in such case, I can store private data on the neighborhood accessed disk and shared them among my home members while allowing my friends or colleages to access the other disk.

 

 

  0      
 
  0      
 
#1
Options
4 Reply
Re:How to configure the two USB disks that connected to the router
2022-02-25 18:54:03

  @DamienScreen 

 

Check Chapter 7.1 from your C4000 user guide and this guide for configuring the access of a USB storage device.

There's a possibility that the power provided by the C4000 USB ports is not enough to power the disks, you may try using a powered usb hub for the purpose.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:How to configure the two USB disks that connected to the router
2022-02-25 22:42:04

  @terziyski 

Thanks Terziyski for taking the time to review my question title. However, I guess you missed the question body.

 

Basically, I have two USB disks all connected to the same router and working without issue. Now, I want to assign one disk for internal network access (i.e Network neighborhood access) and assign the other disk for internet FTP access (i.e FTP via internet), is this possible? Is so, how to config it?

 

Regards,

  0  
  0  
#3
Options
Re:How to configure the two USB disks that connected to the router
2022-02-26 14:22:55

  @DamienScreen 

 

Sorry for misunderstanding. I don't think you would be able to use the two disks at the same time as you want.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:How to configure the two USB disks that connected to the router
2022-02-26 14:36:31

  @terziyski 

Thanks for the confirmation.

Just wondering is there any router model supports this feature from TPLink?

Regards,

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 438

Replies: 4

Related Articles
How to configure to use two GX90
147 0
C4000 v2: Possible to have two separate Time Machine disks?
555 0
How to configure two extenders
1439 0
How to have the configuration/control Web Page always connected ?
344 0
Need Configuration File for 3G/4G USB Modem
14354 16
Two TL-WA850RE on the same router - configuration
628 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.