Router Archer VR900 V.3 - Bridge
Hello! this is my first time posting here.
I have 2 Archer VR900 V.3
One is set to be primary as modem router.
The other, i want to set as Bridged.
I looked up online, and couldn't find how to do it. (also couldn't find system parameters in the advanced settings, what do i do for that?)
Any help or tips are much appreciatted.
Thank you and have a good day!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
If you're trying to set VR900 in Access Point mode then try the following.
If your main VR900 is with LAN IP address 192.168.1.1 set the second VR900 LAN IP address in the same subnet as your main VR900 (keep it in 'DSL modem router' mode as the main VR900):
Them connect them like this: Main VR900 LAN port => Secondary VR900 LAN port.
VR900 doesn't support WDS feature nor 'Range Extender' mode, so your only option is to use it as described above.
- Copy Link
- Report Inappropriate Content
If you're trying to set VR900 in Access Point mode then try the following.
If your main VR900 is with LAN IP address 192.168.1.1 set the second VR900 LAN IP address in the same subnet as your main VR900 (keep it in 'DSL modem router' mode as the main VR900):
Them connect them like this: Main VR900 LAN port => Secondary VR900 LAN port.
VR900 doesn't support WDS feature nor 'Range Extender' mode, so your only option is to use it as described above.
- Copy Link
- Report Inappropriate Content
Thank you for the help, i am going to attempt it right now.
i will inform how it goes.
wish me luck!
- Copy Link
- Report Inappropriate Content
Thank you very much for your help!
Everything ended up working out great!!
Thank you very much, and have a great day!!!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1154
Replies: 3
Voters 0
No one has voted for it yet.