No IPv6 Address with Archer MR600 in Wireless Router Mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

No IPv6 Address with Archer MR600 in Wireless Router Mode

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
No IPv6 Address with Archer MR600 in Wireless Router Mode
No IPv6 Address with Archer MR600 in Wireless Router Mode
2022-08-26 19:11:08
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.3.0 0.9.1 v0001.0 Build 210208 Rel.61056n

When I am running my Archer MR600 in Wireless Router Mode:

  • The Router gets an IPv6 Address from the Network (IPv6 is enabled in profile ipoe_1_d)  but
  • Does not assign an IPV6 Address to the LAN and connected devices

(see image)

 

 

So I am limited to IPv4 when in Wireless Router mode, but I need IPv6 in a specific situation. (WireGuard IPv6 only endpoint)

 

This behavior does not occur in 3G/4G Router Mode. In this case everything works as expected: Both IPv4 and IPv6 Addresses are assigned.

  0      
  0      
#1
Options
2 Reply
Re:No IPv6 Address with Archer MR600 in Wireless Router Mode
2022-08-30 08:59:58

  @Obrain17 

 

Hi, thanks for the feedback.

Could you please download the latest firmware from our website and update the firmware to see if the problem can be resolved?

https://www.tp-link.com/en/support/download/archer-mr600/v2/#Firmware

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:No IPv6 Address with Archer MR600 in Wireless Router Mode
2022-08-30 15:05:22 - last edited 2022-08-31 07:02:36

  @Sunshine 

Thank you for the quick reply

 

I did as you recommended and now I have firmware version  1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

 

Unfortunately the behavior has not changed:

Still no IPv6 are assigned to the LAN in Wireless Router Mode. 

Same image as I already posted, IPv6 exits in "Internet" but does not exist in "LAN" 

 

Edit (Update):

 

I have done some more tests in the meantime:

 

If I set a static IPv6 prefix instead of using Delegate (see Image) an IPv6 Address is assigned to the router and to the clients

 

 

With this IPv6 Address

  • I can ping other other clients in the router's lan and the router itself
  • but not access the internet

Apparently the IPv6 default gateway is not set correctly. There is no option to set it similar to the site prefix.

 

I am connecting 2 different routers to the WAN port of the Archer MR600.

  • when I am at home, an AVM Fritzbox: Here I found an option to assign the Site Prefix. Then I can switch back to "Delegate" and everything is working, including the gateway that is also set correctly.
  • when I am in a remote site: an Android Wifi access point connected with a TL-WR902AC to the WAN port of the Archer MR600. Nothing can be configured there, so I have only IPv4 or IPv6 limited to internal IP-Addresses, when I assign a static Site Prefix as described above

 

I will do some more tests with the Android scenario, maybe I find a solution. Of course I still appreciate your help 

 

 

 

 

 

 

 

 

  1  
  1  
#3
Options

Information

Helpful: 0

Views: 1057

Replies: 2

Related Articles