connectng 4G modem router with ax11000 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

connectng 4G modem router with ax11000 router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
connectng 4G modem router with ax11000 router
connectng 4G modem router with ax11000 router
2022-09-23 11:34:29
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

I have bought Archer MR600 which I want to connect via ethernet cable to a gaming router AX11000. Please write how to setup these two devices in order to make archer mr600 as modem only that transmits internet signal to ax11000.

 

I would appreciate your help.

 

Kind regards,

 

Artur

  0      
  0      
#1
Options
7 Reply
Re:connectng 4G modem router with ax11000 router
2022-09-23 14:40:10

  @artpast any ideas? will MR600 have a bridge mode in firmware update?

  0  
  0  
#2
Options
Re:connectng 4G modem router with ax11000 router
2022-09-25 18:58:49

  @artpast How to set TP-link MR600 4G modem/router as modem only mode that transmits internet to the WAN socket of ARCHER AX11000?

 

 

  0  
  0  
#3
Options
Re:connectng 4G modem router with ax11000 router
2022-09-26 03:22:51

  @artpast 

 

Hi, MR600 doesn't support bridge mode, but you could still connect the AX11000 WAN port to the MR600 to connect the internet, in this way, there will be two NATs in the network. 

To avoid two NATs, you could also consider to change AX11000 to be Access Point mode.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:connectng 4G modem router with ax11000 router
2022-09-26 05:33:16

  @Sunshine Thx for help:) When I connect this two devices as two NATs, can I have remote access to the NAS (server) connected to AX11000 via link agggregation port?

  0  
  0  
#5
Options
Re:connectng 4G modem router with ax11000 router
2022-09-26 06:24:59

  @artpast MR600 has 192.168.1.1 and works as a modem; AX110000 has 192.168.0.1 andworks as a router.

  0  
  0  
#6
Options
Re:connectng 4G modem router with ax11000 router
2022-09-27 03:10:59

  @artpast 

 

Hi, to access the NAS connected to AX11000 remotely when there are two NATs, you will need to configure port forwarding on both devices.

 

Besides, please check if the MR600 WAN IP address is a private IP address or public IP address, if it is a private IP address, that means the ISP uses CGNAT and port forwarding will not work since there is another NAT on ISP side.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#7
Options
Re:connectng 4G modem router with ax11000 router
2022-09-27 07:07:24

  @Sunshine Thx, I have public IP from my ISP. Please write what should I exactly do port forward internet to my NAS Synology.

 

Internet - Tplink MR600 (192.168.1.1) - Tplink AX11000 (192.168.0.1) - NAS Synology (connected via Link Aggregation LCAP).

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 700

Replies: 7

Related Articles