Home Network Community > All Threads > Archer MR600 V2 - wifi ping loss
< All Threads

Archer MR600 V2 - wifi ping loss

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer MR600 V2 - wifi ping loss

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer MR600 V2 - wifi ping loss
Archer MR600 V2 - wifi ping loss
2022-10-16 10:30:14
Model: Archer MR600  
Hardware Version: V2
Firmware Version: 1.5.0 0.9.1 v0001.0 Build 210914 Rel.59719n

Hello,

I am having problems with wifi on my new Archer MR600 V2. There seems to be a consistent packet loss.

 

Screenshot 1 shows ping as ran from my laptop connected through wifi (2.4 GHz). I originally was connected on 5 GHz where I had those issues and for a while it seemed that by switching to 2.4 GHz and disabling 5 GHz solved the issue. But unfortunately I still have those issues.

 

Screenshot 2 shows ping requests ran at the same time to the router from my Raspberry PI that is connected through Ethernet. No loss there.

 

I tried disabling NAT Boost as suggested in a smiliar thread, but it didn't help. Any suggestions appreciated!

 

  0      
 
  0      
 
#1
Options
3 Reply
Re:Archer MR600 V2 - wifi ping loss
2022-10-16 11:27:22 - last edited 2022-10-16 11:30:56

Update: I have sent 100 ping requests to the router from my Android phone connected through 2.4 GHz and have 0 packet loss. I have ran at the same time 100 ping requests from my laptop and have 9% packet loss again. There seems to be an issue with my laptop wifi, although I have not experienced it using my older Zyxel wifi router.

 

I have a Realtek 8821CE wifi.

  0  
  0  
#2
Options
Re:Archer MR600 V2 - wifi ping loss
2022-10-17 09:58:19

  @Doh101010 

 

Hi, so both 2.4GHz and 5GHz WiFi have the ping loss issue on the laptop, right? may I know how far is it between your laptop and the router? and is the WiFi signal strong or not?

 

Besides, please try to change the WiFi channel and channel width on the router to see if the issue can be resolved, for example, for 2.4GHz WiFi, try channel 1, 6 or 11, and try channel width 20MHz.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#3
Options
Re:Archer MR600 V2 - wifi ping loss
2022-10-19 17:45:11

  @Sunshine Hello, the distance is about 5 meters across one wall (wooden frame with insulation, not bricks/concrete). Windows declares full signal in the statusbar.

The problem seems to be in the OS/driver though (Windows 11). I have followed a guide which suggested changing OneDrive settings in Local Group Policy and disabling Windows Update download from other PCs and managed to get rid of packet loss on 2.4 GHz (I cannot paste the link.)

 

The problem persists on 5GHz from my laptop. I will try to look more into the channels. I will also boot my laptop to Linux and see if the issues are the same there.

  0  
  0  
#4
Options

Information

Helpful: 0

Views: 620

Replies: 3

Related Articles
Archer MR600 v2 Hidden Wifi
735 0
Archer mr600 v2
791 0
i want to enable band selection in my archer MR600 V2
9546 8
Archer MR600 V2 Carrier Aggregation & Band Selection
24933 15
Question on Archer MR600 V2
1066 0
MR600 V2 Getting 80+ Ping on Vi Sim.
504 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.