DHCP manually assigned IP limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

DHCP manually assigned IP limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
DHCP manually assigned IP limit
DHCP manually assigned IP limit
2022-12-12 14:58:21

Hi,

I have a Archer C6 and can't add manually more than 64 equipments in DHCP.

How Can i do that please ?

IS it possible ?

 

Thanks

  0      
  0      
#1
Options
2 Reply
Re:DHCP manually assigned IP limit
2022-12-13 09:53:01 - last edited 2022-12-13 10:21:33

  @dIaBoLyK 

 

That's not possible, because it's a limitation hard-coded in the router's FW.

This limit has been implemented, probably based on the router's HW limitation (chipset model, memory, etc.).

If you attempt to flash an OpenWRT on the router to overcome this limitation, this will void its warranty.

Besides, if you haven't done this before, you could brick your device in the process - I wouldn't advise that.

 

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:DHCP manually assigned IP limit
2022-12-13 09:55:59

  @terziyski 

 

Ok but it seems possible with an alternative firmware like OpenWRT...

  0  
  0  
#3
Options