Home Network Community > All Threads > TL-MR6400 low Signal Strength
< All Threads

TL-MR6400 low Signal Strength

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-MR6400 low Signal Strength

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-MR6400 low Signal Strength
TL-MR6400 low Signal Strength
2022-12-16 05:41:06
Tags: #Signal Strength
Model: TL-MR6400  
Hardware Version: V5
Firmware Version: 1.1.0 0.9.1 v0001.0 Build 210803 Rel.55933n

Hi All,

 

Appreciate your advice

I was bought TL-MR6400 on July 2022

Start last month (October 2022), the signal strength always below 25%

1. Always in the same spot

2. Always using the same ISP event the same data package

 

Have been tried:

1. Reset the router -> still the same

2. Plug out, plug in -> still the same
3. Used custom profile APN -> still the same

4. Tried to insert the card in my smartphone, got full signal. Then used for tethering and run smoothly

4. I bought another card (different telco), plug in to the router -> still 25% signal and slow (well working fine in my smartphone)


TL-MR6400 v5 00000001

Firmware Version: 1.1.0 0.9.1 v0001.0 Build 210803 Rel.55933n

 

  1      
 
  1      
 
#1
Options
2 Reply
Re:TL-MR6400 low Signal Strength
2022-12-16 14:51:48

  @d3nny 

 

Hi, it is recommended to check which network type and band the MR6400 uses on Advanced->Status page.

Then insert the same SIM card into your phone and check which band your phone is using:

https://www.tp-link.com/en/support/faq/3488/

 

If they are working on different bands, please try to change the band manually on the MR6400 to see if the signal will be improved:

https://www.tp-link.com/en/support/faq/3099/

 

By the way, please note that the MR6400 is a LTE Cat4 product, which doesn't support 4G+, if your phone works on 4G+ or even 5G, it would be normal that the MR6400 speed would be slower than your phone.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:TL-MR6400 low Signal Strength
2022-12-19 06:03:28

  @Sunshine 

Thanks for your response and your suggestion

Yups, my phone works on 5G. Just noticed this router is LTE cat4

 

I had tried your suggestion, and create manual profile:
1. Manual band selection (only choose one)

2. Manual network selection

3. Change the APN

 

For now the signal strength around 25 - 50%. Now, should much better.

Thanks

  1  
  1  
#3
Options

Information

Helpful: 1

Views: 1524

Replies: 2

Tags

Signal Strength
Related Articles
TP-MR6400 signal strength low 25%
4655 1
Low Signal Strength
793 0
Constant loosing signal TL-MR6400 v3
1037 2
Signal Strength
156 0
no 4g signal for TL-MR6400
521 0
TL-WN8222N V2 reports low signal strength
863 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.