Home Network Community > All Threads > M7000 refuses to factory reset
< All Threads

M7000 refuses to factory reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

M7000 refuses to factory reset

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
M7000 refuses to factory reset
M7000 refuses to factory reset
2023-01-11 11:09:56 - last edited 2023-01-11 11:27:08
Model: M7200  
Hardware Version: V1
Firmware Version: 211230

I purchased this M7000 MiFi Hotspot device a few months ago and when I tried to connect to the WiFi network more recently, it wasn't connecting properly with DHCP. I tried rebooting the MiFi, but found I needed to manually set IP Address to 192.168.0.x to connect to it. First problem.

 

From there it seems like the device won't factory reset properly. I've tried 20 times resetting with the reset button on the back as per manual, tried clicking Factory Reset in the iOS app and from the web page 192.168.0.1 and also tried updating the firmware, but it won't work, the lights flash as though it's doing a factory reset, but each time it just comes back with the same settings like the reset failed. Any ideas?

 

Very disappointed this device has become so unreliable.

  0      
 
  0      
 
#1
Options
2 Reply
Re:M7000 refuses to factory reset
2023-01-13 02:22:27 - last edited 2023-01-13 02:23:16

  @BenCharlesRhys 

 

Hi, may I know what settings you've changed? Such as Wi-Fi name and Wi-Fi password? you mean they are still the one customized by yourself instead of the default name and password after factory reset, right?

 

In addition, may I know if all your client devices need to set static IP address to connect the wifi? what client devices do you usually connect to it?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:M7000 refuses to factory reset
2023-01-13 03:01:25

  @Sunshine I've tried to change all sorts of settings such as logs, wifi strength, wifi name, etc. and yes the customised name's and other settings all stay the same on factory reset.

 

Yes any client device needs a static IP address before it will connect. I'm normally connecting with iPhone 12 and MacBook Air. Also tried connecting with a Windows PC.

 

It's running firmware: M7000(EU)_V1_211230

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 801

Replies: 2

Related Articles
Factory reset
1371 0
Factory reset
951 2
AV600 Poweline extender refuses to factory reset
4474 0
Factory Reset, now router not turning on
706 0
reset (factory settings)
1018 0
Factory reset M5
3763 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.