Home Network Community > All Threads > Archer C64. WAN port on 100Mbps after ISP upgrade
< All Threads

Archer C64. WAN port on 100Mbps after ISP upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C64. WAN port on 100Mbps after ISP upgrade

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C64. WAN port on 100Mbps after ISP upgrade
Archer C64. WAN port on 100Mbps after ISP upgrade
2023-05-26 04:21:35 - last edited 2023-05-29 06:46:48
Model: Archer C64  
Hardware Version:
Firmware Version:

I recently upgraded my home internet to FTTP.  My internet speed was 100/20. It is now 1000/40 and my archer c64 I use is now only showing it is running at 100Mbps instead of 1000 like it was before I upgraded.

 

I haven't changed any cables, but I have got a new Modem that does have Gigabit ports and the ethernet cable connected directly to my pc from that new modem is at 1000.

 

But for some reason, the C64 is stuck on 100 and cannot find a way to change it anywhere 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Archer C64. WAN port on 100Mbps after ISP upgrade-Solution
2023-05-26 08:59:29 - last edited 2023-05-29 06:46:48

  @Sunshine 

 

hello

 

thanks for the reply. 
 

after doing some testing on some different ports; it looks like the tech who upgraded my internet has damaged the cable running through my walls that connect the Ethernet from where my modem is to one of the bedrooms. 
 

as I tested the archer directly next to the modem and was getting a 1000Mbps link speed

Recommended Solution
  0  
  0  
#3
Options
2 Reply
Re:Archer C64. WAN port on 100Mbps after ISP upgrade
2023-05-26 08:50:18

  @Danstar 

 

Hi, is the Ethernet cable between new modem and WAN port of Archer C64 the same as the one used when connecting PC directly to the new modem?

Please make sure the Ethernet cable is of good quality, and it is better to use Cat6 or above cable.

 

In addition, may I have a screenshot of the 100Mbps link rate between WAN port of Archer C64 and your new modem?

And if you connect the PC to LAN port of the Archer C64, what is the link speed between the PC and router LAN port? How to check the associated/link speed on a wired client

 

By the way, may I know the model number of your new modem? If it has several LAN ports, please also try a different port of the modem.

And who is your ISP please?

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer C64. WAN port on 100Mbps after ISP upgrade-Solution
2023-05-26 08:59:29 - last edited 2023-05-29 06:46:48

  @Sunshine 

 

hello

 

thanks for the reply. 
 

after doing some testing on some different ports; it looks like the tech who upgraded my internet has damaged the cable running through my walls that connect the Ethernet from where my modem is to one of the bedrooms. 
 

as I tested the archer directly next to the modem and was getting a 1000Mbps link speed

Recommended Solution
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 623

Replies: 2

Related Articles
why input Internal port - empty in Archer C64
1526 0
Tp link archer c64
228 0
Help with Ipv6 port forwarding on Archer C64
1282 0
Archer C64
455 1
WiFi router not working Archer C64
1321 4
Archer C64 1.0 rebooting issue
972 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.