Error 4716 - The entry in use cannot be deleted (Service Filtering)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I see others have had this problem, service filtering page doesnt work
*the bulb doesnt work
* deleting an entry doesnt work
* adding an entry doesnt work
cleared caches
different browsers
different computers
please help its driving me insane
no update available for me to download
ERROR is usually Error code: 4716
The entry in use cannot be deleted
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, may I have a screenshot of your Service Filtering settings and the screenshot of the error message?
Besides, it seems that your current firmware is not the latest one, please download the latest firmware from the official website below and update it manually:
- Copy Link
- Report Inappropriate Content
@Sunshine thanks so much for the reply
OK, manual update was a success (i was scared to do manually, but it was easy)
Stilll no fix .....
points to note
i access through 192.168.1.100
I have an extender 192.168.1.109
the extender need forwarding ?
pics enclosed
- Copy Link
- Report Inappropriate Content
@sunshine
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello, could you please back up the current configuration file first on Advanced->System Tools->Backup&Restore page, and then reset it to factory defaults by holding reset button for 8 seconds?
After the factory reset, please check if you are able to configure the Service Filtering properly, if so, you could also try to import the previous configuration file to see if it still works.
- Copy Link
- Report Inappropriate Content
@zzmail @sunshine thanks for the reply, does it seem like a config file in the router software. has become corrupted ??!
- Copy Link
- Report Inappropriate Content
hey @sunshine reset worked sort of
still got a Plex problem though now ? 32400 is stil not working for me
- Copy Link
- Report Inappropriate Content
Hi, is the 32400 port still in the list and enabled after the factory reset? or service filtering has been disabled after the factory reset, but issue happens again after importing the config file?
Are you able to disable the existing items in the service filtering page? or disable the service filtering function completely?
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Hello, may I have a screenshot of your Service Filtering settings and the screenshot of the error message?
Besides, it seems that your current firmware is not the latest one, please download the latest firmware from the official website below and update it manually:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 874
Replies: 9
Voters 0
No one has voted for it yet.