Deco P9 maximum PLC powerline units at the same time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Deco P9 maximum PLC powerline units at the same time

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Deco P9 maximum PLC powerline units at the same time
Deco P9 maximum PLC powerline units at the same time
2023-06-15 09:13:22
Model: Deco P9  
Hardware Version: V2
Firmware Version: Deco P9(EU)_V2_1.1.3_201228

I bought five deco p9 units: in the app, sometimes, I notice that the PLC connection to some units disappears. Since I'm having problems, which I'll have to investigate anyway, I wanted to know in the meantime if there is a maximum number of DECO P9 devices that can be connected to the PLC at the same time. Does this limit exist? How much is?

  1      
  1      
#1
Options
5 Reply
Re:Deco P9 maximum PLC powerline units at the same time
2023-06-15 09:51:22

  @utente1 tplink recommends maximum 10 units if they are connected wiressly or powerline

  0  
  0  
#2
Options
Re:Deco P9 maximum PLC powerline units at the same time
2023-06-15 15:29:43

akapal wrote

  @utente1 tplink recommends maximum 10 units if they are connected wiressly or powerline

  @akapal 

 

They have changed it recently to recommended maximum of 6: How many Deco units can I add to my Deco mesh network?

  0  
  0  
#3
Options
Re:Deco P9 maximum PLC powerline units at the same time
2023-06-15 17:35:27

I have five p9 devices so I shouldn't run into issues related to the number of nodes. Six is the limit, perfect I have five: that can't be the problem. I've read that there are beta firmware circulating, where can I download the latest one?

  0  
  0  
#4
Options
Re:Deco P9 maximum PLC powerline units at the same time
2023-06-19 22:05:17
Unrelated to the total number of units, but I am suddenly experiencing the same thing with PLC disappearing. I have three P9 units in total.
  0  
  0  
#6
Options
Re:Deco P9 maximum PLC powerline units at the same time
2023-06-20 19:00:04

In my case the system is stable up to 4 devices, but when I plug the fifth unit it happens that a random unit (there is not one in particular) loses\recover the PLC connection in a loop of seconds or minutes

 

The latest firmware beta I've found, is in this article:

https://community.tp-link.com/en/home/kb/detail/412668

 

https://static.tp-link.com/beta/2021/202106/20210628/Deco_P9_V1_V2_1.1.3_20210616_Backhaul.zip

 

When I have time and possibility I will install it to see if it will solve the problems.

  0  
  0  
#7
Options

Information

Helpful: 1

Views: 820

Replies: 5

Related Articles