MR3220 modem unplugged
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MR3220 modem unplugged
Region : Portugal
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.15.2 Build 130423 Rel.61823n
ISP : Optimus
Hi, I have the MR3220 working for 1 year and never had a problem (location A). Now, I tried to use the router in another geographic location (location B or C) and it stopped working well with the modem. Here is the scenario:
HW MR3220v2
FW 3.15.2 Build 130423 Rel.61823n (it was on the 2012 firmware when detected this problem, upgraded to this one and the problem persists)
Modem Huawei E392u-12
Tests:
Location A - I can connect to internet with modem connected on computer or to router (ether or wifi)
Location B or C (both completely geographical diferent) - I can connect to internet with modem connected on computer (have speeds of 21Mbps d/l and 16Mbps u/l). When modem directly on router, it does not seem to recognize, returning unplugged. Some time it recognizes, but it turns to unplugged when I try to do a connect. I already upgraded to latest firmware, uploaded again the modem bin file "E392u-12_vid(12d1)_pid(1505)_file(5)_entry(1)" from TPLink site, deactivated all other configs from router that are not needed for the test (wifi, ...), but the problem persists. Rebooted the router without modem connected, waited a while, connected modem, and still gives unplugged. When going back to the modem on PC, it always work ok. I have attached a clean log file from the reboot, connect the modem directly to the USB port after a while, the router recognizes the modem and immediatly after, returns unplugged.
Does anyone have any idea on what may be the problem?
Thanks for any help!
Model : TL-MR3220
Hardware Version : V2
Firmware Version : 3.15.2 Build 130423 Rel.61823n
ISP : Optimus
Hi, I have the MR3220 working for 1 year and never had a problem (location A). Now, I tried to use the router in another geographic location (location B or C) and it stopped working well with the modem. Here is the scenario:
HW MR3220v2
FW 3.15.2 Build 130423 Rel.61823n (it was on the 2012 firmware when detected this problem, upgraded to this one and the problem persists)
Modem Huawei E392u-12
Tests:
Location A - I can connect to internet with modem connected on computer or to router (ether or wifi)
Location B or C (both completely geographical diferent) - I can connect to internet with modem connected on computer (have speeds of 21Mbps d/l and 16Mbps u/l). When modem directly on router, it does not seem to recognize, returning unplugged. Some time it recognizes, but it turns to unplugged when I try to do a connect. I already upgraded to latest firmware, uploaded again the modem bin file "E392u-12_vid(12d1)_pid(1505)_file(5)_entry(1)" from TPLink site, deactivated all other configs from router that are not needed for the test (wifi, ...), but the problem persists. Rebooted the router without modem connected, waited a while, connected modem, and still gives unplugged. When going back to the modem on PC, it always work ok. I have attached a clean log file from the reboot, connect the modem directly to the USB port after a while, the router recognizes the modem and immediatly after, returns unplugged.
Does anyone have any idea on what may be the problem?
Thanks for any help!
File:
