RE300 Wi-Fi off!
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hallo
This evening, on a laptop the repeated 5GHz WiFi had no internet anymore; on the other laptop, the 2.4GHz was still working. I didn't understand why the first laptop wasn't connected to Internet anymore, so I restarted all (also the MR600) but with no luck! I turned on Smart Connect. Looking at the RE300 status, now I read:
Range extender
---------------------------------------------------------------------
Extended 2.4GHz (Off) Extended 5GHz (Off)
(Nothing!) (Nothing!)
Above that, I see:
2.4GHz Blue WiFi logo 2.4GHz Gray WiFi logo | 5GHz Gray WiFi logo
Internet ----- Router ------------------------------------- RE300 ---------- Client
5GHz Blue WiFi logo
Why are the two output WiFi logos gray???
On the Android WiFi Analyzer, I see the higher WiFi signal on 2.4 and 5GHz near the RE300, but the first laptop on 5GHz has IP address 192.168.1.104 and the second laptop on 2.4GHz (2.4GHz only WIFI card) has IP address 192.168.1.101 from the router (RE300 gives IPs from 150 to 199). On both computers, signal is weaker than when they were connected to RE300. I tried disconnecting and reconnecting WiFi and also ipconfig /renew.
Now, with Smart Connect Off on the MR600, all seems working again, but signal on the first laptop (a hp Probook, with a good WiFi sensitivity) is a bit low (signal from distant MR600). The second laptop, a Lenovo Z70/80, has a lower WiFi sensitivity and, despite it, it has a high signal! (signal from close RE300).
I read:
Range extender
---------------------------------------------------------------------
Extended 2.4GHz Extended 5GHz (Off)
SSID: ReteMiaTP (Nothing!)
Channel: 1
MAC: E4-C3-2A-...
IPs are still the same, assigned by MR600... I can't have high IPs from RE300... I tried disconnecting and reconnecting WiFi on the laptop and also ipconfig /release and ipconfig /renew.
The 4 lights are white.
