Home Network Community > All Threads > Archer A8 dhcp lease ip 0.0.0.0
< All Threads

Archer A8 dhcp lease ip 0.0.0.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer A8 dhcp lease ip 0.0.0.0

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer A8 dhcp lease ip 0.0.0.0
Archer A8 dhcp lease ip 0.0.0.0
2024-01-04 10:46:17
Tags: #Address Reservation
Model: Archer A8  
Hardware Version: V1
Firmware Version: 1.13.2 Build 230824 Rel.74702n(4555)

Hello, 

 

I have a Archer A8, with a strange problem after the last firmware update

I have several iot devices (switches, lights, wifi thermostats, wifi speakers.. ) for wich i assigned static ipdresses, are not getting the static lease ip address that is configured on the router. Mainly, the problem is after a reboot, several devices are getting ip 0.0.0.0

 

I dont use the IOT network, the devices are not isolated

 

I tried setting the dhcp lease from 10.0.0.2-10.0.0.250, same result

I tried setting the dhcp lease outside the address reservations (10.0.0.200-10.0.0.230), same result

 

 

The address reservation exists, as shown :

Please advise

 

Thanks, 

Robert

 

  0      
 
  0      
 
#1
Options
6 Reply
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-01-05 08:45:17

  @robex2005 

 

Hi, will those IoT devices still work when the IP addresses show 0.0.0.0? If so, maybe the IP addresses displayed are incorrect, they are actually getting correct IP address. 

You could also reserve an IP address for a computer and check if there is any similar issue, if so, compare the IP addresses on the client list of the router and also checking its IP on the computer itself for comparison: How to find IP address on your devices

 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-01-05 18:57:21

  @Sunshine no, the devices with ip 0.0.0.0 are displayed as offline, i have no ping to them (tried pinging the static ip that is set on the router)...

My macbook and laptop, does not even connect to wifi network if not getting a valid ip address...

If i set a static ip address on the macbook, all is ok, also the router shows the manual ip address correctly...

 

  0  
  0  
#3
Options
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-01-08 02:27:24

  @robex2005 

 

Hi, when your macbook and laptop use DHCP to obtain IP address, and if you configure address reserveation for the macbook and laptop, do you mean they are always unable to connect the WiFi after the router reboots? how would they reconnect?

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#4
Options
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-01-08 08:52:56

  @Sunshine the lease problem is sporadic, not always

If i reboot the router several times, eventually is ok

If i don't reboot, and i set a static ip address on the mac or laptop, the internet/network is ok

The problem is mainly with the iot devices,  i can not set a static ip on the devices, so i rely on the static lease that is handed out by the router...

  0  
  0  
#5
Options
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-01-15 18:06:21

@TP-Link 

 

Any news?

Switched temporarily to a C6U, without any issue for now, even after several reboots!

Any beta firmalware for the A8 for testing?

Thanks 

  0  
  0  
#6
Options
Re:Archer A8 dhcp lease ip 0.0.0.0
2024-02-01 08:01:18

  @robex2005 

 

Well, since the supoort is almost ZERO for this issue, OPENWRT is the way, no issues at all!

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 635

Replies: 6

Tags

Address Reservation
Related Articles
Archer A8 MAC - IP binding
433 0
Archer A8 hairpin nat
788 0
Does Archer A8 support WDS bridging?
2860 0
Archer A6 v2.0 ip adress 0.0.0.0
1251 0
Archer A8 speed capped at 100 Mbps
3966 0
Unable to port forward 44158 on Archer A8
1026 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.