On archer vr400 with RE200 mesh extender qos is not working correctly with mesh.

on the main router the static IP devices connected to mesh are sometimes showing up as the mesh device itself under a different Mac but using the Static Ip of device connected to mesh. 

also wire devices connected to mesh also do this even when all devices have there own set static IP. 
 

All devices are working. 
there is a issue that 

1. wire devices do not appear on the connected device list on the mesh device or the main router but they DO show correctly in the LAN list with there correct IP (I must make clear that the devices are all working correctly, they are not appearing correctly) 
 

2. devices connected on mesh do not appear correctly on the connected device list in the tether app or the router web interface despite occasionally appearing correctly on the mesh device itself In the tether app.
wire connected devices do not appear almost all the time, they do sometimes appear for a few seconds in the tether app. 
they are WORKING tho it seems to be a visual error with the data sync of IP and Mac of the mesh device. 
 

in summary 

I belive there is an issue with the Mac of connected devices showing as the mesh device with the static Ip of the connected device to mesh. 
the mesh device has its own static IP and sometimes one of the two mesh devices does show correctly on the main router web interface and the tether app. 
both mesh devices have the same settings with dhcp turned off and there own static IP.

devices connected via wifi to mesh show correctly on the device and correctly dhcp.

I need the devices to be showing as there own Mac to correctly set QOS to work.