Archer AX73 v2 firmware 1.0.12 degraded badwidth
Had anyone experienced a degrading of bandwidth from WAN to LAN?
Like, if I will connect laptop directly to my gateway, I have measured 1Gb, as I have from my ISP, but, if I will measure bandwidth from laptop connected to router by ethernet cable (cat6) it has degraded to roughly 500Mb. It never measure 1Gb sam as directly to gateway.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi, please make sure QoS is disabled on the router and then test the wired speed of the router again.
- Copy Link
- Report Inappropriate Content
@pepicheck I have a similar problem on the TP-Link AX80-AX6000 V1 model device. I think TP-Link publishes Firmware without testing it. The situation I am experiencing and the fact that the problem has not been resolved is a real disgrace.
- Copy Link
- Report Inappropriate Content
Hi, please make sure QoS is disabled on the router and then test the wired speed of the router again.
- Copy Link
- Report Inappropriate Content
@Sunshine Let me try.
- Copy Link
- Report Inappropriate Content
Seem that work. It would be really beneficial, to have noted somewhere, that enabling of QoS could significantly degrade the overall speed.
- Copy Link
- Report Inappropriate Content
Glad to hear that disabling QoS helps, and thanks a lot for the feedback, we will record and report to development for evaluation.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 739
Replies: 5
Voters 0
No one has voted for it yet.