AX90 with no 160Mhz bandwidth for 5Ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AX90 with no 160Mhz bandwidth for 5Ghz

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AX90 with no 160Mhz bandwidth for 5Ghz
AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-15 20:15:06
Model: Archer AX90  
Hardware Version: V1
Firmware Version:

I have AX90 V1.2 Canadian version,

Not able to swtich to 160 Mhz bandwidth. It is not shown in the list for bandwidth selection on both 5Ghz bands.

 

Any solution to this?

 

 

  0      
  0      
#1
Options
7 Reply
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-15 21:40:30

  @Vish_9685 

 

This sounds really odd cause according to its specs AX90 should support 160Mhz channel width on one of its 5GHz bands:

 

 

Can you post a screenshot fron the router's WebGUI ?

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#2
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-16 15:05:37

  @terziyski 

 

Yes it sounds odd and I am feeling disappointed having this product and not be able to use 160Mhz bandwidth.

Here is GUI image as asked.

 

 

Please see if you could help to figure out missing item.

 

thank you.

  0  
  0  
#3
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-16 20:07:45

  @Vish_9685 

 

Probably @Sunshine would address this issue best.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-16 20:11:18

  @terziyski 

 

Thank you for your response.

 

@Sunshine could you please support for resoultion of this?

  0  
  0  
#5
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-18 01:18:36

Vish_9685 wrote

  @terziyski 

 

Thank you for your response.

 

@Sunshine could you please support for resoultion of this?

@Sunshine 

i am not sure that you got chance to look at my query! In mean time I got following response from TPlink support team

 

"I will explain how the 5G networks have been designed and working on Archer AX90. Firstly, please be aware that channel 120-128 are reserved for weather radar in Canada and Australia, and they are not allowed to be used by other equipment.

 

 

Archer AX90 supports 160MHz on its 5G-2 Wi-Fi only, 5G-1 doesn’t support 160MHz as per its hardware design. If 5G-2 is required to work on 160MHz, the router needs to bind all the channels from 100 to 128. However, as stated already channel 120 to 128 are not allowed to operate on the routers in Canada and Australia, thus you will not get 160MHz.

 

Thank you for your kind understanding"

 

It quiet surprising and shameful that product is sold in Canadian market with misleading specifications printed on box.

 

if Tplink is already awre that 160 Mhz is not going to work in Canadian region then why they sell it saying 160 MHz bandwidth.

 

I lost all trust in this brand.

 

 

 

  0  
  0  
#6
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-18 01:57:53 - last edited 2024-01-18 02:32:29

  @Vish_9685 

 

An odd hardware limitation in AX90 as can be seen from the tech support response.

If 5G-1 was the band with 160Mhz (channels 36-64) for Canada and Australia this probably could have been better - check this story.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#7
Options
Re:AX90 with no 160Mhz bandwidth for 5Ghz
2024-01-18 02:22:52

  @terziyski 

 

thanks for sharing this. It's helpful to understand.

 

I am heavily disappointed with TPlink as its basic product design mistake and still selling the product with misleading info.

 

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 907

Replies: 7

Related Articles