Powerline drop out after 2 days absence
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AV600 Powerline adaptor works perfectly when I am home but if I leave the house for more than 2 days ethernet connectivity drops out and requires manual reboot upon my return. I get drop out alerts from my Smoke alarm system connected directly to ethernet connector on the WPA8631P. Hive connected to ethernet also down. WiFi still up but not sure if that's from Router or Powerline adapter.
Powersave is set to OFF.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Sunshine wrote
Hi，how many powerline units do you have in total since you mentioned AV600 and also TL-WPA8630? please make sure power saving mode are disabled on all the powerline adapters.
If the issue still happens, please let us know the LED status of the powerline units especially the powerline LED and also Ethernet LED.
You could also try different wall sockets for testing.
Thanks for your help. I have checked that Power saving is off. I restarted pair a few times and it has now settled down with no failures for over a week so I regard this as resolved.
- Copy Link
- Report Inappropriate Content
Hi，how many powerline units do you have in total since you mentioned AV600 and also TL-WPA8630? please make sure power saving mode are disabled on all the powerline adapters.
If the issue still happens, please let us know the LED status of the powerline units especially the powerline LED and also Ethernet LED.
You could also try different wall sockets for testing.
- Copy Link
- Report Inappropriate Content
Sunshine wrote
Hi，how many powerline units do you have in total since you mentioned AV600 and also TL-WPA8630? please make sure power saving mode are disabled on all the powerline adapters.
If the issue still happens, please let us know the LED status of the powerline units especially the powerline LED and also Ethernet LED.
You could also try different wall sockets for testing.
Thanks for your help. I have checked that Power saving is off. I restarted pair a few times and it has now settled down with no failures for over a week so I regard this as resolved.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 546
Replies: 3
Voters 0
No one has voted for it yet.