How to enable all the lan port on AX72

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

How to enable all the lan port on AX72

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
How to enable all the lan port on AX72
How to enable all the lan port on AX72
2024-03-08 02:07:40
Model: Archer AX72  
Hardware Version: V1
Firmware Version: 1.2.4 Build 20240125 rel.39949(5553)

I can't access all the lan port, only Lan 1 and Lan 3 i can access when connecting rj45. However if i used Lan 2 and Lan 4 it does not work. How can i fix this and make all my lan ports working? Thank You 

  0      
  0      
#1
Options
1 Reply
Re:How to enable all the lan port on AX72
2024-03-11 03:42:56

  @Anonymous005 

 

Hi, by default, all the LAN ports should work, there is no options to disable specific LAN ports.

Did you enable IPTV/VLAN on Advanced->Network->IPTV/VLAN page? If so, you may check whether LAN 2 and 4 are for other usages such as IPTV etc..

 

If no IPTV/VLAN enabled, please test if the LAN 2/4 is able to detect the Ethernet cable but no internet access, or doesn't detect Ethernet cable at all, also try different Ethernet cables and different wired client device.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 298

Replies: 1

Related Articles