Cannot reset password for TP Link M7200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot reset password for TP Link M7200

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot reset password for TP Link M7200
Cannot reset password for TP Link M7200
2024-03-09 11:56:48 - last edited 2024-04-08 08:42:03
Model: M7200  
Hardware Version: V1
Firmware Version:

I cannot reset my password by pressing the reset button the mobile router.

 

I typed the password "admin" after resetting.

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Cannot reset password for TP Link M7200-Solution
2024-03-11 12:06:49 - last edited 2024-04-08 08:42:03

  @sam127 

 

Hi, please try reset it again via Hard reset by pressing "Reset" button: with the Mobile Wi-Fi powered on, open the back cover, use a pin to press and hold the Reset hole, the hold time and device behavior are different for different products:

    1) For devices with a screen such as M7350, M7450 and M7650: Open the back cover, use a pin to press and hold the Reset hole until you see "Power Off" on the screen, then TP-Link Logo, "Restoring" and "Succeed" will appear on the screen successively, which means the factory reset really works.

    2) For device without a screen such as M7000, M7010, and M7200: Open the back cover, use a pin to press and hold the Reset hole for about 3 seconds, you will see the three LEDs turning off for about 3 seconds, then turning on for about 5 seconds and flashing once, stay on for 10 seconds and then start booting up, which means the factory reset really works.

Note: If you don't see the above behaviors on the screen or LEDs, please try the factory reset again.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  2  
  2  
#3
Options
2 Reply
Re:Cannot reset password for TP Link M7200
2024-03-09 16:12:20

The password cannot be the default password on the back of the router. 

 

Tpmifi app do not detect the wifi from it. Does anybody face the same problem?

 

How did you resolve the issue? 

  0  
  0  
#2
Options
Re:Cannot reset password for TP Link M7200-Solution
2024-03-11 12:06:49 - last edited 2024-04-08 08:42:03

  @sam127 

 

Hi, please try reset it again via Hard reset by pressing "Reset" button: with the Mobile Wi-Fi powered on, open the back cover, use a pin to press and hold the Reset hole, the hold time and device behavior are different for different products:

    1) For devices with a screen such as M7350, M7450 and M7650: Open the back cover, use a pin to press and hold the Reset hole until you see "Power Off" on the screen, then TP-Link Logo, "Restoring" and "Succeed" will appear on the screen successively, which means the factory reset really works.

    2) For device without a screen such as M7000, M7010, and M7200: Open the back cover, use a pin to press and hold the Reset hole for about 3 seconds, you will see the three LEDs turning off for about 3 seconds, then turning on for about 5 seconds and flashing once, stay on for 10 seconds and then start booting up, which means the factory reset really works.

Note: If you don't see the above behaviors on the screen or LEDs, please try the factory reset again.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  2  
  2  
#3
Options

Information

Helpful: 0

Views: 597

Replies: 2

Related Articles