Home Network Community > All Threads > MU-MIMO can't be enabled on BE800
< All Threads

MU-MIMO can't be enabled on BE800

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

MU-MIMO can't be enabled on BE800

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
MU-MIMO can't be enabled on BE800
MU-MIMO can't be enabled on BE800
2024-05-02 05:44:32 - last edited 2024-06-05 01:22:11
Model: Archer BE800  
Hardware Version: V1
Firmware Version: 1.1.1

I've upgraded my BE800 to FQ v1.1.1 a while which don't have a problem.

However, when I check my BE800 & RE815XE today for any setting can be fine tuned, then I found MU-MIMO cannot be used.  If I'm not wrong, I used it when my BE800 was FW v1.0.12 & FW v1.0.9 (when I first installed to use it).  I've tried again to set to use "OFDMA+MU-MIMO" but it only set to "OFDMA only".  I tried to downgrade the firmware to v1.0.12 & v1.0.9 to verify if this is a bug by v1.1.1, but the downgrade process failed which should be due to v1.1.x can't be reverted to v1.0.x.

 

Any advise how I can use MU-MIMO on BE800 v1.1.1?  Please note I still can use OFDMA+MU-MIMO on RE815XE.  I'm use MESH.

 

 

Archer BE800 v1_v1.1.5 RE815XE v1_1.0.6 RE705X v1_1.0.10
  0      
 
  0      
 
#1
Options
4 Reply
Re:MU-MIMO can't be enabled on BE800
2024-05-02 10:32:40 - last edited 2024-06-05 01:22:11

  @Kinkeen 

 

You can try the FW release from this post for the MU-MIMO issue on BE800 v1.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  1  
  1  
#2
Options
Re:MU-MIMO can't be enabled on BE800
2024-05-03 06:08:29

  @terziyski 

 

Thank you.  I downloaded and using the v1.1.1 beta.  Now The MU-MIMO can be enabled, but the wallpaper of GUI now showing BETA

 

Archer BE800 v1_v1.1.5 RE815XE v1_1.0.6 RE705X v1_1.0.10
  0  
  0  
#3
Options
Re:MU-MIMO can't be enabled on BE800
2024-05-03 08:28:48

  @Kinkeen

 

That's normal - it's beta FW version aiming to fix the MU-MIMO issue. When the next stable FW comes these watermarks would be gone.

If this was helpful click once on the arrow pointing upward. If this solves your issue, click once the star to mark it as a "Recommended Solution".
  0  
  0  
#4
Options
Re:MU-MIMO can't be enabled on BE800
2024-05-04 17:20:24

  @terziyski is anyone getting constant crashing with both the 1.1.1 and the 1.99.97 beta build?  My router crashes and restarts at least twice a day.

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 808

Replies: 4

Related Articles
BE800 MU-MIMO issue... STILL!
155 0
MU-MIMO support
950 0
Can't find MU-MIMO option
2338 0
MU-MIMO
3539 0
Archer AX73 Can't turn on Mu-Mimo
801 0
MU-MIMO keeps switching off and 2.4ghz wifi issue
677 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.