Password to configure

Password to configure

Password to configure
Password to configure
2024-05-04 17:13:12 - last edited 2024-06-05 01:37:05
Model: TL-WR940N  
Hardware Version: V6
Firmware Version:

I just bought this device, and when i go to the browser to configure my device i need to put a password that i never had. I did not reset the device since it will ask for some more wth

  0      
  0      
#1
Options
1 Accepted Solution
Re:Password to configure-Solution
2024-05-07 02:55:29 - last edited 2024-06-05 01:37:05

  @Jun0 

 

Hi, the web-based management interface is a web GUI that allows users to view information or change settings of the Router.

To access the web management interface of your Router, you may simply connect a PC to the Router network (either through Ethernet or Wi-Fi), open a browser, in the browser address bar, put in tplinkwifi.net or 192.168.0.1 (192.168.0.1 is the default LAN IP address of the Router).

 

When you access the web management interface for the first time, it will ask you to set an admin password, please remember this admin password well.

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Password to configure-Solution
2024-05-07 02:55:29 - last edited 2024-06-05 01:37:05

  @Jun0 

 

Hi, the web-based management interface is a web GUI that allows users to view information or change settings of the Router.

To access the web management interface of your Router, you may simply connect a PC to the Router network (either through Ethernet or Wi-Fi), open a browser, in the browser address bar, put in tplinkwifi.net or 192.168.0.1 (192.168.0.1 is the default LAN IP address of the Router).

 

When you access the web management interface for the first time, it will ask you to set an admin password, please remember this admin password well.

Recommended Solution
  0  
  0  
#2
Options