TL-MR6400 v5 Portfreigabe

TL-MR6400 v5 Portfreigabe

TL-MR6400 v5 Portfreigabe
TL-MR6400 v5 Portfreigabe
2024-05-11 19:03:38 - last edited 2024-05-11 19:05:02
Model: TL-MR6400  
Hardware Version: V5
Firmware Version: 1.1.0 0.9.1 v0001.0 Build 210803 Rel.55933n

Hallo, leider versuche ich mich grad erfolglos an einer Portfreigab um per VS-Code (SSH-Port 22) auf eine Raspberry zuzugreifen.

Hello, unfortunately I'm trying unsuccessfully to open a port to access a Raspberry via VS Code (SSH port 22).

 

 

Leider ist der Raspi unter der IP-Adress 10.170.245.157 bzw. 192.168.1.101 nicht erreichbar.

Der Telefonanbieter ist Telefonica O²

Wo liegt der Fehler - was mach ich falsch???

 

Unfortunately, the Raspi cannot be reached under the IP address 10.170.245.157 or 192.168.1.101.

The telephone provider is Telefonica O²

Where is the error - what am I doing wrong???

 

Danke - Stefan

  0      
  0      
#1
Options
1 Reply
Re:TL-MR6400 v5 Portfreigabe
2024-05-13 07:20:59

  @Ruebezahl_001 

 

Hi, thanks for posting question in our community.

WAN IP should be a public IP address. The WAN IP is assigned dynamically by ISP. If the WAN IP address of the router is not a public IP address, but a private IP address, that means there is another NAT device connected to the WAN port of the router. You need to open the service ports on that device as well.

 

For most of the 4G LTE router, the internet service provider usually gives the private IP Address. So, if you want to do the port forwarding, please contact your internet service provider to assign you a public IP address or do the port forwarding in their part.

And I checked yours is a private IP address.  It is suggested to google if you don't know how to tell Public IP Address or Private IP Address.

 

For your reference: How to set up Port Forwarding feature on TP-Link Wireless 4G LTE Router.

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 214

Replies: 1

Related Articles