Home Network Community > All Threads > Remote Management (Access and manage the router over the internet)
< All Threads

Remote Management (Access and manage the router over the internet)

Remote Management (Access and manage the router over the internet)

Remote Management (Access and manage the router over the internet)
Remote Management (Access and manage the router over the internet)
2024-10-10 05:56:53 - last edited 2024-10-10 09:29:53
Tags: #Remote Management
Model: TL-WR820N  
Hardware Version: V2
Firmware Version: 1.4.2 Build 191129 Rel.51095n(4555)

Hello,
I want to remotely manage my router over internet. My router model is TL-WR820N. I have enabled it through the following process-
Advanced-> System-> Administration-> Remote Management
My wan ip was mentioned there, i tried with the port number also but no result, error page was showing. I have changed the port number and same result.
 

Note:
1. Pinging from internet on WAN ip was - request timed out.
2. Pinging on WAN ip from same network was successful attempt but router log in page was in accessible.

3. My wan WAN Ip was a Class A Ip address.

How can i remotely manage my router over internet?

Regards
RBot

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:Remote Management (Access and manage the router over the internet)-Solution
2024-10-10 09:27:25 - last edited 2024-10-10 09:29:53

  @RBot 

 

The only solution is to contact your ISP and ask if they can arrange that your receive your publuc IP address on your router WAN port.

This usually happens when you're behind a CG-NAT or for some reason your router WAN IP address is a private IP address (double NAT).

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Remote Management (Access and manage the router over the internet)
2024-10-10 08:54:20

  @RBot 

 

Here's the guide for configuring the remote management via router's WebGUI.

The reason that you can't access your router could be that  your router WAN IP address is not your public IP address.

Your public IP address can be found by opening https://ping.eu in a web browser.

If this IP address doesn't match your router WAN IP address the remote management won't work.

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
  0  
  0  
#2
Options
Re:Remote Management (Access and manage the router over the internet)
2024-10-10 09:18:03
@terziyski the two IPs are different, in this case is there any solution to control remotely? Or can you tell me the problem behind it?
  0  
  0  
#3
Options
Re:Remote Management (Access and manage the router over the internet)-Solution
2024-10-10 09:27:25 - last edited 2024-10-10 09:29:53

  @RBot 

 

The only solution is to contact your ISP and ask if they can arrange that your receive your publuc IP address on your router WAN port.

This usually happens when you're behind a CG-NAT or for some reason your router WAN IP address is a private IP address (double NAT).

If this was helpful click on the arrow pointing upward to make it blue. If this solves your issue, click the star to make it blue and mark the post as a "Recommended Solution".
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 2

Views: 234

Replies: 3

Tags

Remote Management
Related Articles
Can't Access Remote Management
346 0
Remote management
595 0
Accessing Remote Management
572 0
Remote Cloud Access to Router's Web GUI
854 1
C24 AP mode - can't access remote management
762 0
Archer VR600 - Remote Management Access - 403 Forbidden
1824 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.